* Makefile.am (SUBDIRS): Remove 'tests'.
(include): The '$(top_srcdir)/tests/local.mk' file.
(check-root): Remove this convenience target, it's no longer needed
now that the "real" check-root target once in 'tests/Makefile' will
land in the top-level makefile.
* configure.ac (AC_CONFIG_FILES): Remove 'tests/Makefile'.
* tests/Makefile.am: Rename ...
* tests/local.mk: ... like this, with a lot of adjustments.
* tests/init.cfg: Move ...
* init.cfg: ... here. This is necessary, for a limitation of the
gnulib-provided 'tests/init.sh', which unconditionally look for
'init.cfg' in the $(srcdir) directory.
* tests/*/*.sh: Adjust: expect init.sh to be in '$srcdir/tests',
not in '$srcdir', and extend $PATH with './src', not with '../src'.
* tests/Coreutils.pm: Adjust similarly.
* tests/pr/pr-tests.pl ($pfx): Likewise.
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
But only when both A and B were hard links to the same symlink.
* src/copy.c (same_file_ok): Handle another special case: the one
in which we are moving a symlink onto a hard link to itself.
In this case, we must explicitly tell the caller to unlink the
source file. Otherwise, at least the linux-3.x kernel rename
function would do nothing, as mandated by POSIX 2008.
* tests/mv/symlink-onto-hardlink-to-self: New test.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
Reported by Bernhard Voelker in http://bugs.gnu.org/10686
Normally, mv detects a few subtle cases in which proceeding with a
same-file rename would, with very high probability, cause data loss.
Here, we have found a corner case in which one of these same-inode
tests makes mv refuse to perform a useful operation. Permit that
corner case.
* src/copy.c (same_file_ok): Detect/exempt this case.
* tests/mv/symlink-onto-hardlink: New test.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
Initially reported by: Matt McCutchen in http://bugs.gnu.org/6960.
Raised again by Anders Kaseorg due to http://bugs.debian.org/654596.
Improved-by: Paul Eggert.
Relax initial regexp to match more instances, but add a
filter to avoid some invalid conversions. Run this:
git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \
-e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \
-e ' s/\`([^'\''"]*?'\'')/'\''$1/g'
The last disjunct in the above (...) filter is to exempt
any line that contains this string: '\''
With quoting like that, converting a ` to ' is likely to cause trouble,
so we'll handle those manually. Here are three examples where
the exemption is required:
*': `link-to-dir/'\'': hard link not allowed for directory'*) ;;
printf 'creating file `%s'\''\n' $f
'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
Automatically adjust both the source (now in only one place)
and all tests that expect the resulting output via this:
git grep -l 'Try.*--help' src/system.h tests \
| xargs perl -pi -e 's/Try \\?`(\S+ --help)/Try '\''$1/'
* cfg.mk (sc_prohibit_short_facl_mode_spec): New rule.
* tests/cp/acl: Extend setfacl mode spec to have length 3.
* tests/ls/slink-acl: Likewise.
* tests/mv/acl: Likewise.
Report and analysis by Bruno Haible.
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
skip_test_ emits its diagnostic both to FD 9 (tty), and to
FD 2 (usually the log file), whereas init.sh's skip_ emits
only to FD 9. Without that, the log is slightly less useful.
* tests/cp/fiemap-2: Use skip_test_, not skip_.
* tests/cp/fiemap-perf: Likewise.
* tests/du/bigtime: Likewise.
* tests/du/files0-from-dir: Likewise.
* tests/du/move-dir-while-traversing: Likewise.
* tests/init.sh: Likewise.
* tests/misc/sort-stale-thread-mem: Likewise.
* tests/misc/stat-nanoseconds: Likewise.
* tests/mv/i-3: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/split/filter: Likewise.
Prompted by a report from Pádraig Brady.
Those were useful when tests might have been run in the same
directory and in parallel. Now, each test is run in a newly-
created empty directory.
* tests/cp/backup-1: Remove obsolete uses of "$$".
* tests/cp/same-file: Likewise.
* tests/dd/misc: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/mv/i-3: Adjust comment to match just-changed code.
Spotted by Pádraig Brady.
* tests/init.cfg (retry_delay_): Correct spelling of function name
in usage example.
This patch was written by Jim Meyering and myself.
* src/copy.c (copy_reg): Turn EISDIR to ENOTDIR to improve the
quality of diagnostics for commands like "cp a nosuch/". Reported
by Марк Коренберг and Alan Curry in the thread starting at:
http://lists.gnu.org/archive/html/bug-coreutils/2010-11/msg00178.html
* THANKS: Update.
* tests/mv/trailing-slash: Add a test.
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
* tests/mv/i-3: Adjust so that the symlink is resolved
before redirecting to the background command, as otherwise
the stdin descriptor passed to the command will fail the
isatty() or ttyname() test.
* tests/init.cfg (retry_delay_): Describe
the backoff method used.
* tests/ls/readdir-mountpoint-inode: Add a timeout
to the stat call to eliminate the chance of hangups.
* tests/mv/i-3: Change the timeout required to pass
from 1 second to a range of .1s - 3.1s.
* tests/rm/dangling-symlink: Likewise.
All tests currently pass on NFS on Linux kernel 2.6.22 at least,
but some fail on 2.6.9, so we exclude those here.
* tests/init.cfg (is_local_dir_): A new function
returning if the specified directory is on a local file system.
(require_local_dir_): A new function to skip tests
if the current directory is not on a local file system.
* tests/cp/existing-perm-race: Skip if non local.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/du/basic: Use refactored function.
* tests/install/basic-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
* tests/du/slink: Likewise. Remove redundant test
for NFS file system.
* tests/misc/join: s/local/locale/.
* tests/cp/acl: Support USE_ACL not being defined.
* tests/mv/acl: Likewise. Also fix typo in skip message.
* tests/cp/preserve-slink-time: Support HAVE_UTIMENSAT being 0.
* tests/touch/no-dereference: Likewise.
* tests/ls/capability: Normalize so 1 is not required to be last char.
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
Running "make check &" would hang due to SIGTTOU and SIGTTIN signals.
* tests/misc/stty: Ignore SIGTTOU.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Ignore SIGTTIN.
* src/cp.c (usage): Show new option -n in --help.
(main): Handle new option -n.
* src/mv.c (usage): Show new option -n in --help.
(main): Handle new option -n.
* doc/coreutils.texi: Document new cp/mv option -n.
* tests/cp/cp-i: Add tests for -f, -i and -n options.
* tests/mv/mv-n: New test for mv -n.
* tests/Makefile.am: Add test mv/mv-n to the list.
* NEWS: Mention the change.
