* tests/init.cfg (require_mkfs_PATH_): New function to test whether mkfs
is in PATH, otherwise adding /sbin to PATH. Needed for distributions
(OpenSuSE, Solaris) in which sudo does not include /sbin in PATH.
* tests/cp/cp-a-selinux: Use require_mkfs_PATH_.
* tests/cp/cp-mv-enotsup-xattr: Likewise.
* tests/cp/sparse-fiemap: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/rm/read-only: Likewise.
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
All tests currently pass on NFS on Linux kernel 2.6.22 at least,
but some fail on 2.6.9, so we exclude those here.
* tests/init.cfg (is_local_dir_): A new function
returning if the specified directory is on a local file system.
(require_local_dir_): A new function to skip tests
if the current directory is not on a local file system.
* tests/cp/existing-perm-race: Skip if non local.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/du/basic: Use refactored function.
* tests/install/basic-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
* tests/du/slink: Likewise. Remove redundant test
for NFS file system.
* tests/misc/join: s/local/locale/.
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
* tests/test-lib.sh (require_selinux_enforcing_): New function.
* tests/mkdir/selinux: Use it.
Otherwise, this test would fail on Rawhide with SELinux disabled.
* tests/test-lib.sh (skip_if_setgid_): New function.
* tests/setgid-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove setgid-check.
* tests/chmod/c-option: Use the new function rather than sourcing
the separate file.
* tests/cp/cp-parents: Likewise.
* tests/install/install-C: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mkdir/perm: Now that this test is no longer always skipped,
make it work independently of ls: use stat, not ls, to get perm string.
* test-lib.sh (rwx_to_mode_): Use stat, not ls to get perm string
This test was run only when RUN_VERY_EXPENSIVE_TESTS=yes was set.
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
* tests/test-lib.sh (working_umask_or_skip_): New function, from...
* tests/umask-check: ...here. Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove umask-check.
* tests/mkdir/perm: Use the function rather than sourcing the file.
* tests/cp/cp-parents: Likewise.
* tests/cp/parent-perm: Likewise.
Bruno Haible reported that parent-perm was failing to run umask-check.
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
* tests/mkdir/selinux: Undo most of previous change,
bc22dbbf84, and instead
invoke the command via "nice". Using "exec" should be
enough, but isn't with OpenBSD's PD KSH v5.2.14 99/07/13.2.
Eric Blake suggested using nice.
This test would fail on most non-Linux systems because the original
expected an "Invalid argument" diagnostic, yet they all produced
"Operation not supported".
* tests/mkdir/selinux: Accept both strings. Factor out duplication.
Identical to the bug fixed by 72d052896a.
* src/mkfifo.c (main): Use "scontext", not NULL optarg in diagnostic.
* src/mknod.c (main): Likewise.
Reported by Cristian Cadar, Daniel Dunbar and Dawson Engler.
* tests/mkdir/selinux: Test for the above fixes.
* NEWS: Mention the fixes.
* tests/priv-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove priv-check.
* tests/test-lib.sh (require_root_): New function.
Use this function rather than sourcing the priv-check file.
* tests/sample-test: Use require_root_ rather than priv-check.
* tests/chown/basic: Likewise.
* tests/cp/cp-a-selinux: Likewise.
* tests/cp/preserve-gid: Likewise.
* tests/cp/special-bits: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/misc/chcon: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/one-file-system: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/touch/now-owned-by-other: Likewise.
* tests/rm/fail-eperm: Use skip_if_root_ rather than priv-check.
* Makefile.maint (sc_root_tests): Reflect this change:
search for the new function name.
* src/mkdir.c (verbose_output): New function.
(announce_mkdir): Use it.
* src/split.c (usage): Update.
* src/split.c (cwrite): Write to stdout, not stderr.
* doc/coreutils.texi (split invocation): Remove the mention
of --verbose output being printed to stderr.
* tests/mkdir/p-v: Redirect stdout, not stderr.
* tests/misc/split-a: Likewise.
* NEWS: Mention this change.
* TODO: Remove this item.
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable.
* tests/rm/empty-name: Likewise.
* tests/rm/unreadable: Reenable this test. Adjust for new rm.
* tests/mkdir/Makefile.am: Add writable-under-readonly.
* tests/mkdir/writable-under-readonly: Add some comments.
This test is always skipped, for now.
* tests/Makefile.am (ta): Hook up the new root-only script.
* tests/tail-2/infloop-1: Make this test pass.
* tests/tail-2/Makefile.am (TESTS): Add infloop-1.
* tests/tail-2/fflush: Remove unused file.
* tests/check.mk (vc_executable_is_in_TESTS): More portable.
* tests/check.mk (check): Depend on the above.
* build-aux/check.mk: Remove comment mentioning AUTHORS file.
tests/check.mk (top_srcdir): Define.
tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir),
$(abs_top_srcdir), and $(abs_top_builddir), since they're
defined via the included tests/check.mk.
I started with the patches from Red Hat.
The entries below tell how the code evolved.
* src/ls.c (print_long_format, print_file_name_and_frills): When
there is no security context (due to getfilecon/lgetfilecon failing
with e.g. ENOTSUP), print it as "?", not "".
* src/ls.c (print_file_name_and_frills): Make -Z work without -l.
(length_of_file_name_and_frills): Likewise.
* src/ls.c: Remove the --lcontext and --scontext options.
Change the way -Z, --context work so that it no longer implies -l.
Thus, -Z -l will work like -lcontext and -Z without -l will work
like --scontext.
Adjust tests to reflect new 'ls -l' syntax -- affects only
systems with SELinux when operating on a file with no ACL.
These tests assumed that everything before the first space on
each line is the 10-byte mode string. But there may also be a "+"
in the 11th column, just before the space. However, note that this
is not new. The same thing would have happened even without the
change below, when listing a file with an ACL.
* tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm:
* tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod:
* tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm:
Don't make compilation depend on USE_ACL. An SELinux security
context counts as an "alternate access control method", so ls
must output a "+" for each file with a security context.
* src/ls.c [struct fileinfo] (have_acl): Declare unconditionally.
(FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly.
(gobble_file): Record whether a file has a security context, and
update the condition used to determine whether to print the "+".
(gobble_file): Call getfilecon/lgetfilecon also when
format == long_format, so that we get the "+".
* src/ls.c (gobble_file): Add a comment explaining why (with a
security context option) ls doesn't exit nonzero due to e.g.,
getfilecon failing with errno == ENOTSUP.
* src/ls.c (gobble_file): Ignore failure of getfilecon if it's due
to ENOTSUP.
* src/ls.c (gobble_file): Factor out three small blocks using
getfilecon and lgetfilecon.
Don't ignore return value from getfilecon and lgetfilecon.
* src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C
ternary operator).
(print_scontext_format): Likewise.
(print_scontext): Declare to be "bool", not int. Adjust uses.
* src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX).
* tests/misc/chcon: New file.
* tests/misc/chcon-fail: New file.
* tests/Makefile.am (check-root): Run new, root-only misc/chcon test.
* tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail.
* tests/misc/Makefile.am (TESTS): Add selinux.
* tests/misc/selinux: New file.
* tests/help-version: Skip chcon.
