* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
* tests/sparse-file: Remove file Move contents into ...
* tests/test-lib.sh (require_sparse_support_): ...here. New function.
* tests/cp/sparse: Use the function, not the file.
* tests/du/8gb: Likewise.
* tests/Makefile.am (EXTRA_DIST): Remove sparse-file.
* README (Running tests as root): Also set PATH in suggested "sudo"
command. This avoids failure of at least tests/cp/cp-a-selinux
when the default PATH does not contain /sbin.
* tests/cp/cp-a-selinux: Don't redirect stderr to /dev/null.
"mkfs" was failing due to /sbin not being in PATH.
* tests/cp/perm: Use stat to get the permission string, not ls.
This test was run only when RUN_VERY_EXPENSIVE_TESTS=yes was set
in the environment. It would fail on SELinux-enable systems
because ls-generated permission strings would not match, e.g.,
"test _-rw-r--r--+ = _-rw-r--r--" would fail.
* tests/test-lib.sh (working_umask_or_skip_): New function, from...
* tests/umask-check: ...here. Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove umask-check.
* tests/mkdir/perm: Use the function rather than sourcing the file.
* tests/cp/cp-parents: Likewise.
* tests/cp/parent-perm: Likewise.
Bruno Haible reported that parent-perm was failing to run umask-check.
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
* src/copy.c (copy_internal): Revert change of 2005-03-01,
4303f04545
Prompted by Michael Stone, who pointed me to an old bug report from
Ian Jackson: http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/7504
* tests/cp/special-f: New file. Test for the above.
* tests/cp/Makefile.am (TESTS): Add special-f.
* NEWS: mention this bug fix.
When mcstransd is not running (i.e., after service mcstrans stop),
"make check" as root would provoke two test failures.
* tests/cp/cp-a-selinux: Use the context, root:object_r:tmp_t:s0,
that works both with and without mcstransd.
Thanks to Eric Paris for the tip and to Ondřej Vašík for alerting
me to the problem.
Reported by Robert Scheck in <http://bugzilla.redhat.com/436717>.
* tests/priv-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove priv-check.
* tests/test-lib.sh (require_root_): New function.
Use this function rather than sourcing the priv-check file.
* tests/sample-test: Use require_root_ rather than priv-check.
* tests/chown/basic: Likewise.
* tests/cp/cp-a-selinux: Likewise.
* tests/cp/preserve-gid: Likewise.
* tests/cp/special-bits: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/misc/chcon: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/one-file-system: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/touch/now-owned-by-other: Likewise.
* tests/rm/fail-eperm: Use skip_if_root_ rather than priv-check.
* Makefile.maint (sc_root_tests): Reflect this change:
search for the new function name.
This avoids another spurious Mac OS 10.5.1 (Darwin 9.1) test failure.
* tests/cp/preserve-gid: Accept a group ID of 0, as well.
Reported by Elias Pipping.
* tests/cp/Makefile.am (TESTS): Add existing-perm-race.
* tests/cp/existing-perm-race: New test. It isn't much of a
test yet, since it's hard to catch the race, but it has a FIXME
that will let us do a better test later.
* NEWS: Mention this change.
* doc/coreutils.texi (cp invocation): Describe the new behavior.
* src/copy.c: No longer include "canonicalize.h".
(copy_reg): Upon failure to open a dangling destination symlink, don't
canonicalize the name, but rather fail (default) or, with POSIXLY_CORRECT,
repeat the open call without O_EXCL (potentially dangerous).
* src/copy.h (struct cp_options) [open_dangling_dest_symlink]:
New member. Reorder the others, grouping "bool" and "enum"
members together.
* tests/cp/thru-dangling: Test for changed and new behavior.
* src/cp.c (cp_option_init): Initialize new member.
* src/install.c (cp_option_init): Likewise.
* src/mv.c (cp_option_init): Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
* tests/cp/same-file: Detect when linking to a symlink links to
the target of the symlink (FreeBSD 6.1 does this, Linux does not),
and skip the few tests that would otherwise fail.
Redirect output of final comparison to stderr, since all stdout
is already redirected.
* tests/test-lib.sh (require_selinux_): New function.
* tests/misc/chcon: Use it.
* tests/misc/selinux: Use it here, too.
* tests/cp/cp-a-selinux: and here.
* tests/selinux: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove selinux.
Reported by Mike Frysinger and Bauke Jan Douma.
* src/copy.c (copy_internal): When same-file detection requires
'stat'ing the destination file, also 'lstat' it and ensure that
it wasn't the destination of a preceding copy operation.
This bug was introduced on 2007-06-18.
* tests/cp/abuse: New test for the above.
* tests/cp/Makefile.am (TESTS): Add abuse.
* NEWS: Document this bug fix.
* src/copy.c (copy_reg): Read from a regular file, even if it
appears (stat.st_size == 0) to be empty. This reverts an
optimization introduced on 2005-11-23 for coreutils-6.0.
Otherwise, "cp /proc/cpuinfo /tmp" creates an empty file,
on e.g., linux-2.6.20.
* tests/cp/proc-zero-len: New file. Test for the above.
* tests/cp/Makefile.am (TESTS): Add proc-zero-len.
Reported by Dan Berrangé.
--parents and symlinks. Close some race conditions possible when
the destination replaces a newly-created file with a symlink.
* NEWS: Document that 'cp --parents' no longer mishandles
symlinks in file name components of source.
* src/copy.c (HAVE_LCHOWN): Default to false.
(lchown) [!defined HAVE_LCHOWN]: Define to chown, for convenience.
* src/cp.c (lchown) [!HAVE_LCHOWN]: Likewise.
* src/install.c (lchown [!HAVE_LCHOWN]: Likewise.
* src/copy.c (set_owner): Use lchown instead of chown, for safety
in case the file got replaced by a symlink in the meantime.
* src/cp.c (re_protect): Likewise.
* src/install.c (change_attributes): Likewise.
* src/copy.c (copy_internal): Use ordinary C rather than an #if.
* src/cp.c (lchown) [!HAVE_LCHOWN]: Define to chown, for convenience.
(struct dir_attr): Cache the entire struct stat of the directory,
rather than just its mode, so that we needn't stat the directory
twice (which can lead to races).
(re_protect): Don't use XSTAT as that's not appropriate in
this context (symlinks should be followed here). Instead, use
the cached stat value.
(make_dir_parents_private): Save dir's entire struct stat, not
just its mode.
* tests/cp/cp-parents: Add test to check against bug with
cp --parents and symlinks.
* NEWS: "cp" no longer considers a destination symlink to be the
same as the referenced file when copying links or making backups.
* src/copy.c (copy_reg): When following a symlink, use the
followed name in later chown etc. requests, so that the created
file is affected, rather than the symlink. Use O_NOFOLLOW on
source when not dereferencing symlinks; this avoids a race.
Preserve errno correctly when doing multiple open attempts on the
destination.
(copy_internal): Follow destination symlinks only when copying a
regular file and only when we don't intend to remove or rename the
destination first, regardless of whether following source
symlinks; this is because since POSIX and tradition (e.g.,
FreeBSD) say we should ordinarily follow destination symlinks if
the system calls would ordinarily do so.
* src/copy.h (struct cp_options): Add comment that 'dereference'
is only for source files.
* src/cp.c (usage): Note that --derereference etc. are only for
source files.
(make_dir_parents_private): Follow symlinks, regardless of whether
--dereference is specified, because these are destination symlinks.
* tests/cp/same-file: Adjust tests to match revised behavior.
Filter out perror output since it might vary from host to host.
Use sed alone instead of also using echo.
* doc/coreutils.texi (cp invocation): Document the behavior better when
the destination is a symlink. Clarify source versus destination
symlinks. Describe the new behavior for destination symlinks.
2007-06-15 Jim Meyering <jim@meyering.net>
* src/copy.c: Include "canonicalize.h".
(copy_reg): Use canonicalize_filename_mode to follow the symlink,
so that we can always open with O_EXCL and avoid a race.
* NEWS: Mention the bug fix.
* src/copy.c (copy_reg): When open fails with EEXIST, the destination
is lstat'able, and a symlink, call open again, but now without O_EXCL.
* tests/cp/thru-dangling: New file, to test for the above fix.
* tests/cp/Makefile.am (TESTS): Add thru-dangling.
* THANKS: Add Michael McLagan.
Bug report from Michael McLagan in <http://bugzilla.redhat.com/243588>.
* tests/Makefile.am (t9): New target, to run tests/cp/cp-a-selinux.
(all_t): Add t9.
Use a directory on a loopback device mounted with -o context=...
* tests/cp/cp-a-selinux: Since this test now runs mount and umount,
it is a root-only one.
* tests/cp/Makefile.am (TESTS): Add cp-a-selinux.
* tests/selinux: New file.
* tests/Makefile.am (EXTRA_DIST): Add selinux.
* tests/misc/selinux: Source the new script, rather than open coding it.
Change how "cp -a" and "cp --preserve=context" work with SELinux.
Now, cp -a attempts to preserve context, but failure to do so does
not change cp's exit status. However "cp --preserve=context" is
similar, but failure *does* cause cp to exit with nonzero status.
* src/copy.h (struct cp_options) [require_preserve_context]: New member.
* src/copy.c (copy_reg, copy_internal): Implement the above.
* src/mv.c (cp_option_init): Initialize the new member.
* src/install.c (cp_option_init): Likewise.
* src/cp.c (cp_option_init): Likewise.
(decode_preserve_arg): Set it or reset it.
FIXME: add an on-writable-NFS-only test
