On these file systems the atime is always zero.
Problem found with ZFS on Ubuntu 24.04 LTS.
* tests/stat/stat-birthtime.sh (check_timestamps_updated):
* tests/stat/stat-nanoseconds.sh:
Work even if atimes are always zero.
* tests/stat/stat-nanoseconds.sh:
Fix typo: print_ver_ called before init.sh sourced.
* src/ls.c: Track if --time=mtime is explicitly specified,
so that we can apply the GNU extension of sorting by the
specified time, when not displaying (-l not specified),
and not explicitly sorting (-t not specified).
* tests/ls/ls-time.sh: Add / Update test cases.
Fixes https://bugs.gnu.org/71803
* src/cp.c: Add the entries for the --update=none-fail option.
* tests/mv/update.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/70727
Problem reported by Ionut Nicula in:
https://bugs.gnu.org/70477
* src/tail.c (tail_bytes): Do not loop forever on commands
like 'tail -c 4096 /dev/zero'.
* tests/tail/tail-c.sh: Test this fix.
* src/cat.c (main):
Improve test for when copying will exhaust the output device.
Do not rely on st_size, which is unreliable in /proc.
Use lseek instead; this is good enough here.
* tests/cat/cat-self.sh: Test the relaxation of the heuristic
for self-copying.
od was seen to abort() on glibc on ia64 and m68k with the error:
Fatal glibc error: printf_fp.c:501 (__printf_fp_buffer_1):
assertion failed:
cy == 1 || (p.frac[p.fracsize - 2] == 0 && p.frac[0] == 0)
* tests/od/od-multiple-t.sh: Avoid outputting long double floats
to avoid undefined behavior. 'float' and 'double' are standardized
by IEEE 754 (except on Linux/m68k) and don't have undefined values.
* tests/misc/numfmt.pl: Verify that printf field width specs
count characters and not bytes before enabling locale tests.
This was seen on FreeBSD 14.0 and Solaris 11 OpenIndiana.
Reported by Bruno Haible
There is a mismatch between isblank() used by tr and c32isblank() now
used by uniq on Solaris 11 OpenIndiana. isblank() was seen to return
true for non breaking space, while c32isblank() returned false.
Interestingly on Solaris, non breaking space is considered a blank
character, and isblank() and c32isblank() honor this in all locales.
* tests/uniq/uniq.pl: Adjust the blank check to use join(1) rather than
tr(1), as join uses the same blank determination routines as uniq(1).
* tests/misc/numfmt.pl: Some systems with the fr_FR.UTF-8
locale installed, do not have a thousands grouping character defined.
In this case we skip the locale tests which depend on a non empty
grouping character.
* tests/chmod/symlinks.sh: The count of adjusted modes was
one more on systems where symlink modes can be adjusted.
Therefore only include the non symlinks in the count.
* tests/chmod/symlinks.sh: Ensure this new test is immune
to setgid directories by resetting modes with =777 rather than 777.
Also output more debugging in all failure cases.
* tests/mv/mv-exchange.sh: Canonicalize different
"operation not supported" messages, so we can ignore correctly.
Reported by Bruno Haible on AIX, NetBSD, and OpenBSD.
Using the shell's exec -a feature can be awkward
so add support for setting overriding argv[0].
This gives env full control over the arguments it passes.
* src/env.c: Accept -a,--argv0 and set argv[0] appropriately.
* tests/env/env.sh: Add test cases.
* doc/coreutils.texi (env invocation): Describe -a,--argv0.
* NEWS: Mention the new feature.
* src/copy.h (struct cp_options): New member 'exchange'.
* src/copy.c (copy_internal): Support the new member.
* src/mv.c (EXCHANGE_OPTION): New constant.
(long_options): Add --exchange.
(usage): Document --exchange.
(main): Support --exchange.
* tests/mv/mv-exchange.sh: New test case.
* tests/local.mk (all_tests): Add it.
There have been various requests to add -h to avoid following symlinks
for security reasons. This wasn't provided previously as chmod(1)
already ignored symlinks unless specified on the command line.
Note chmod defaults to -H mode rather than the chown default of -P,
as usually chown can work directly on symlinks and so defaults
to not traversing those specified on the command line.
Note FreeBSD chmod does default to -P mode, but we retain the -H mode
default also for compatibility with existing chmod behavior.
Adding -HLP will allow chmod to disable traversing CLI symlinks to dirs.
Adding -h will allow to disable following CLI symlinks to files/dirs,
also operating on all symlinks on systems that support that.
Adding --dereference will be significant with -H (the default). I.e.
symlinks to dirs not recursed, but symlinks are dereferenced.
Adding these options will also be consistent with chown(1), chgrp(1),
and chmod(1) on other systems.
Note since chmod(1) currently ignores symlinks by default,
and -h is primarily a mechanism to avoid following symlinks, rather than
for operating on the symlink itself, we make -h try to chmod a symlink,
but ignore ENOTSUP. In that way we're consistent with chown(1)
where it also ignores ENOTSUP for symlinks, and we don't fail when
trying to be extra secure with command line params.
* doc/coreutils.texi (chmod invocation): Reference the -H,-L,-P
descriptions, and adjust the corresponding macros to say
the default is -H or -P as appropriate.
Add --dereference and -h,--no-dereference descriptions.
* man/chmod.x: Adjust discussion of symlink handling.
* src/chmod.c (main): Accept new options and set
fts flags appropriately.
(process_file): Process / dereference symlinks as necessary.
* src/system.h (emit_symlink_recurse_options): A new function
refactored from chown.c and chmod.c usage().
* tests/chmod/symlinks.sh: New test for the new options.
* tests/local.mk: Reference the new test.
* NEWS: Mention the new feature.
Some signals with values less that the max signal number for the system
do not have defined names. For example, currently on amd64 Linux,
signals 32 and 33 do not have defined names, and Android has a wider
gap of undefined names where it reserves some realtime signals.
Previously the signal listing in env ended up reusing the name
of the last printed valid signal (the repeated HUP below):
$ env --list-signal-handling true
HUP ( 1): IGNORE
HUP (32): BLOCK
HUP (38): IGNORE
..and the corresponding signal numbers were rejected as operands for the
env, kill, and timeout commands.
This patch removes the requirement that sig2str returns 0 for a signal
number associated with an operand. This allows unnamed signals to be in
the sets `env' attempts to manipulate when a --*-signal option is used
with no argument, and kill(1) and timeout(1) to send such unnamed
signals.
* src/operand2sig.c (operand2sig): Drop signame argument, accept all
signal numbers <= SIGNUM_BOUND. All callers updated.
* src/env.c (parse_signal_action_params, reset_signal_handlers)
(parse_block_signal_params, set_signal_proc_mask)
(list_signal_handling): Accept all signal numbers <= SIGNUM_BOUND,
use SIG%d for printing if necessary.
* src/kill.c (list_signals, main): Likewise.
(send_signals): Check errno from kill(3) for bad signo.
* src/timeout.c (main): Update operand2sig call.
* tests/misc/kill.sh: Test listing all signal numbers.
* NEWS: Mention the improvement.
* src/digest.c (main): If --binary was enabled with a previous --tag,
then reset the binary mode to auto select if --untagged then specified.
* tests/cksum/cksum-a.sh: Add a test case.
Since this functionality is recently available
in the exch(1) utility from util-linux,
it was thought best not to complicate mv with it.
This reverts commit 6cd2d5e533
* src/digest.c (main): Only validate the last used --length
for being a multiple of 8.
* tests/cksum/b2sum.sh: Add a test case.
Fixes https://bugs.gnu.org/69546
renameat2() syscall allows atomically swapping 2 paths on one
file system. Expose this ability to the user with --swap.
* doc/coreutils.texi: Describe mv --swap option.
* src/mv.c (main): Support --swap.
* tests/mv/mv-swap.sh: Add test for mv -x.
* tests/local.mk: Reference new test.
* NEWS: Mention the new option.
* src/mktemp.c (main): When --suffix is specified, TEMPLATE
points to the meraged buffer DEST_NAME. As X's in the suffix are
not significant to the generated random characters, the diagnostic
for too few X's should only refer to the template portion.
* tests/misc/mktemp.pl: Adjust accordingly.
* NEWS: Mention the bug fix.
* tests/df/problematic-chars.sh: Rely on gnulib setting
this to "none" where not usable.
* tests/misc/sleep.sh: Likewise.
* tests/printf/printf-mb.sh: Likewise.
* tests/printf/printf-quote.sh: Likewise.
* tests/sort/sort-debug-keys.sh: Likewise.
* src/cp.c (main): Add support for --update=none-fail to provide the
functionality of diagnosing files in the destination,
and exiting with failure status.
(usage): Mark -n as deprecated.
* src/mv.c: Likewise.
* src/copy.h: Add UPDATE_NONE_FAIL definition.
* src/system.h (emit_update_parameters_note): Add --update=none-fail
description.
* doc/coreutils.texi (cp invocation): Likewise.
Also mention why -n is deprecated.
* tests/mv/update.sh: Add a test case, including precedence
with -n and other --update options.
* tests/cp/cp-i.sh: Verify that --backup and --update=none{,-fail}
are mutually exclusive.
* tests/mv/mv-n.sh: Likewise.
* NEWS: Mention the new feature.
Addresses https://bugs.gnu.org/62572
When recursively copying files into OS trees, it often happens that
some subdirectory of the source directory is a symlink in the target
directory. Currently, cp will fail in that scenario with the error:
"cannot overwrite non-directory %s with directory %s"
However, we'd like cp in this scenario to follow the destination
directory symlink and copy the files into the symlinked directory
instead. Let's support this by adding a new option
--keep-directory-symlink that makes cp follow destination directory
symlinks.
We name the option --keep-directory-symlink to keep consistent with
tar which has the same option with the same effect.
* doc/coreutils.texi (cp invocation): Describe the new option.
* src/copy.h: Add the new setting.
* src/copy.h: Adjust to follow symlinks if setting enabled.
* src/cp.c (usage): Describe the new option.
(main): Accept the new option.
* tests/cp/keep-directory-symlink.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the new feature.
* configure.ac: Ensure the compiler can promote 16 bit floating point
types to float, before enabling that code in od. This was an issue
with clang 16 at least.
* src/od.c: Adjust for the new defines.
* tests/od/od-float.sh: Likewise. Also port to the dash shell,
whose inbuilt printf doesn't support hex escapes.
This was introduced in coreutils 9.2 through commit v9.1-184-g40bf1591b,
and was fixed in coreutils 9.5 through commit v9.4-111-gc4c5ed8f4.
This issue has been assigned CVE-2024-0684.
* NEWS: Mention the bug fix.
* tests/split/line-bytes.sh: Add a test case.
Reported by Valentin Metz.
ulimit -v is generally not supported with ASAN, giving errors like:
"ReserveShadowMemoryRange failed while trying to map 0x... bytes.
Perhaps you're using ulimit -v"
* tests/cp/link-heap.sh: Mention ASAN as a possible reason for skipping.
* tests/csplit/csplit-heap.sh: Likewise.
* tests/cut/cut-huge-range.sh: Likewise.
* tests/dd/no-allocate.sh: Likewise.
* tests/printf/printf-surprise.sh: Likewise.
* tests/rm/many-dir-entries-vs-OOM.sh: Likewise.
* tests/head/head-c.sh: Only skip the part of the test needing ulimit.
* tests/split/line-bytes.sh: Likewise.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
* tests/misc/numfmt.pl: Following on from v9.4-86-g615167cc4,
adjust this test accordingly. This test was being skipped
on some systems, and so only noticed now.
Reported by Jim Meyering.
* tests/misc/numfmt.pl: Determine the thousands grouping character
in use, rather than skipping locale tests when it's not a space.
For example fr_FR.UTF-8 uses "NARROW NO-BREAK SPACE" as the grouping
char on modern glibc systems at least.
* tests/sort/sort-h-thousands-sep.sh: Likewise.
Do not perform SELinux context translation for operations not involving
user input or output. Context translation converts MCS/MLS labels into
human readable form, which is useful for user facing applications like
ls(1) or the --context=CTX argument of cp(1).
* src/copy.c (set_process_security_ctx): Use raw selinux variants.
* src/install.c (need_copy): Likewise.
(setdefaultfilecon): Likewise.
* src/selinux.c (computecon): Likewise.
(defaultcon): Likewise.
* tests/cp/no-ctx.sh: Add raw variants to preload lib.
* NEWS: Mention the improvement.
