Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
* tests/dd/sparse: The last two parts of this test would fail due to
the underlying file system at least on Solaris 10 with NFS. That file
system would report that a 3MiB file was occupying <= 1KiB of space
for nearly 50 seconds after creation.
Improved-by: Bernhard Voelker
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/2188210 (which uses XFS).
* tests/dd/sparse (alloc_equal): Add a block allocation
comparison function that accounts for variations due
to alignment.
Notes:
Small seeks are not coalesced to larger ones,
like is done in cache_round() for example.
conv= is used rather then oflag= for FreeBSD compatibility.
* src/dd.c (final_op_was_seek): A new global boolean to flag
whether the final "write" was converted to a seek.
(usage): Describe the new conf=sparse option.
(iwrite): Convert a write of a NUL block to a seek if requested.
(do_copy): Initialize the output buffer to have a sentinel,
to allow for efficient testing for NUL output blocks.
If the last block in the file was converted to a seek,
then convert back to a write so the size is updated.
* NEWS: Mention the new feature.
* tests/dd/sparse: A new test for the feature.
* tests/Makefile.am: Reference the new test.
These edge cases were missed in the previous commit 140eca15c.
* src/dd.c (main): Include the bytes slop when truncating
without further I/O. Don't invalidate the whole file cache
in the case where 0 < count < ibs.
* tests/dd/bytes: Change to using the independent truncate
command to generate the file for comparison. Remove a redundant
test case and replace with one testing the truncation only logic.
dd now accepts the count_bytes and skip_bytes input flag and the
seek_bytes output flag, to more easily allow processing portions of a
file.
* src/dd.c (scanargs): Compute skip_records and skip_bytes when
'skip_bytes' iflag is used. Compute max_records and max_bytes when
'count_bytes' iflag is used. Compute seek_records and seek_bytes
when 'seek_bytes' oflag is used.
(skip_via_lseek): Use new 'bytes' parameter and handle potential
'records' equals to zero. Update the bytes parameter when called with
'fdesc' equal to STDOUT_FILENO. Update the header comments.
(dd_copy): Skip accordingly to skip_records AND skip_bytes. Count
accordingly to max_records AND max_bytes. Seek on output accordingly
to seek_records AND seek_bytes.
* NEWS (New features): Mention it.
* doc/coreutils.texi (dd invocation): Detail new flags and behaviors.
* tests/dd/bytes: New file. Tests for these new flags.
* tests/Makefile.am (TESTS): Add it.
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
* tests/dd/nocache: Relax the test, as the system
may return various errors from posix_fadvise().
HPUX 11.31 returns ENOTTY for example.
Reported by Bruno Haible
* src/dd.c (FFS_MASK): A new macro (Find First Set) refactored
from the following enum as it's now used twice.
(usage): Mention the new 'nocache' flag.
(cache_round): A new function to help ignore requests
to drop cache, that are less than page_size.
(invalidate_cache): A new function to call posix_fadvise()
with the appropriate offset and length. Note we don't
use fdadvise() so we can detect errors when count=0.
(dd_copy): Call invalidate_cache() for the portions read.
(iwrite): Likewise for the portions written.
(main): Call invalidate_cache for page_size slop or
for full file when count=0.
* cfg.mk (sc_dd_O_FLAGS): Adjust to pass.
* doc/coreutils.texi (dd invocation): Describe the 'nocache' flag,
and give some examples of how it can be used.
* tests/dd/nocache: A new test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the new feature.
Those were useful when tests might have been run in the same
directory and in parallel. Now, each test is run in a newly-
created empty directory.
* tests/cp/backup-1: Remove obsolete uses of "$$".
* tests/cp/same-file: Likewise.
* tests/dd/misc: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/touch/fail-diag: Likewise.
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
All tests currently pass on NFS on Linux kernel 2.6.22 at least,
but some fail on 2.6.9, so we exclude those here.
* tests/init.cfg (is_local_dir_): A new function
returning if the specified directory is on a local file system.
(require_local_dir_): A new function to skip tests
if the current directory is not on a local file system.
* tests/cp/existing-perm-race: Skip if non local.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/du/basic: Use refactored function.
* tests/install/basic-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
* tests/du/slink: Likewise. Remove redundant test
for NFS file system.
* tests/misc/join: s/local/locale/.
* tests/init.cfg: Introduce a retry_delay_() function to
repeatedly call a test function that requires a delay.
This delay can now be shorter for the common case on fast
systems, but will double until a configurable limit it reached
before failing on slower systems.
* tests/dd/reblock: Use retry_delay_.
* tests/misc/cat-buf: Likewise.
* tests/misc/stdbuf: Likewise.
* tests/tail-2/F-vs-rename: Likewise.
* tests/tail-2/flush-initial: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/tail-2/wait: Likewise.
* test/dd/misc: Comment that delay is needed to trigger failure.
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/277485
* tests/misc/timeout: Set all expected timeouts to 1s and all
unexpected timeouts to 10s. In this way, tests normally proceed
quickly but may delay up to 10s before reporting failures.
* tests/ls/infloop: Likewise.
* tests/tail-2/pid: Likewise.
* tests/tail-2/pipe-f: Likewise.
* tests/tail-2/wait: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
* tests/dd/skip-seek-past-file: Require sparse support
to ensure that when we're checking if we can create an
$OFF_T_MAX length file, that we don't actually allocate
any space. This was an issue on ecryptfs and was reported
by Bert Wesarg.
* src/dd.c (dd_copy) [C_UNBLOCK]: Always print the final newline for
non-empty output, not just when output size is a multiple of cbs.
* doc/coreutils.texi (dd invocation) [conv=unblock]: Mention that dd
prints a newline after each output record, not just when replacing
trailing spaces.
Reported by Ulrich Drepper.
* tests/dd/unblock: New file. Test for this.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
dd oflag=direct would fail to copy a file with size that is
not a multiple of 512 (destination file system specific)
* NEWS (Bug fixes): Mention it.
* src/dd.c (iwrite): Turn off O_DIRECT for any
smaller-than-obs-sized write. Don't bother to restore it.
* tests/dd/direct: New test for the above.
* tests/Makefile.am (TESTS): Add dd/direct.
* doc/coreutils.texi (dd invocation): Mention oflag=direct
buffer size restriction.
Details in http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/17586
Reported by Eric Sandeen.
* tests/sample-test: Don't recommend using lang-default here.
It is now run for each test automatically, via TESTS_ENVIRONMENT.
* tests/dd/reblock: Don't source lang-default here.
* tests/misc/truncate-fail-diag: Likewise.
* tests/dd/skip-seek-past-file: Just check for
the non system specific part of the error strings.
This was causing an erroneous failure on NetBSD 1.6 at least.
* tests/dd/skip-seek-past-file: I had previously commented that
on some systems lseek(> max file size) may succeed, but left
the possibility of failure in that case, so that I could determine
specific systems to put in the comments for both failure modes.
Following are the before and after operations for seekable files,
for the various erroneous offsets handled by this patch:
skip beyond end of file
before: immediately exit(0);
after : immediately printf("cannot skip to specified offset"); exit(0);
skip > max file size
before: read whole file and exit(0);
after : immediately printf("cannot skip: Invalid argument"); exit(1);
seek > max file size
before: immediately printf("truncate error: EFBIG"); exit(1);
after : immediately printf("truncate error: EFBIG"); exit(1);
skip > OFF_T_MAX
before: read whole device/file and exit(0);
after : immediately printf("cannot skip:"); exit(1);
seek > OFF_T_MAX
before: immediately printf("truncate error: offset too large"); exit(1);
after : immediately printf("truncate error: offset too large"); exit(1);
skip > device size
before: read whole device and exit(0);
after : immediately printf("cannot skip: Invalid argument"); exit(1);
seek > device size
before: read whole device and printf("write error: ENOSPC"); exit(1);
after : immediately printf("cannot seek: Invalid argument"); exit(1);
* NEWS: Summarize this change in behavior.
* src/dd.c (skip): Add error checking for large seek/skip offsets on
seekable files, rather than deferring to using read() to advance offset.
(dd_copy): Print a warning if skip past EOF, as per FIXME comment.
* test/Makefile.am: Add 2 new tests.
* tests/dd/seek-skip-past-file: Add tests for first 3 cases above.
* tests/dd/seek-skip-past-dev: Add root only test for last case above.
* tests/dd/reblock: Change the IPC mechanism to the dd process
under test, from pipes to fifos. Also change the delay
between data writes to 0.2s for both tests.
This should increase the chance that the dd process
will read the data chunks separately.
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
* src/dd.c (O_FULLBLOCK): Define using an enum, not #define.
Derive the value, rather than hard-coding to one that might conflict.
(usage): Mention iflag=fullblock in --help output.
(scanargs): Reset the O_FULLBLOCK bit, so that we don't try to set
an undefined attribute via fcntl (fd, F_SETFL, ...
* tests/dd/misc: Signal framework_failure when necessary.
Use "compare actual expected", so any diffs look "right".
* NEWS (dd): Alphabetize and reword.
* coreutils.texi (dd invocation): Adjust wording.
* src/dd.c (iread_fullblock): New function for reading full blocks.
(scanargs): Check for new parameter iflag=fullblock.
(skip): Use iread_fnc pointer instead of iread function.
(dd_copy): Use iread_fnc pointer instead of iread function.
* tests/dd/misc: Add test for dd - read full blocks.
* doc/coretuils.texi: Mention new parameter iflag=fullblock.
* NEWS: Mentioned the change.
* tests/check.mk (TESTS_ENVIRONMENT): Save and restore TMPDIR around
envvar-check, so that the few scripts that require $TMPDIR don't fail.
This is also good to let a user's default TMPDIR setting be used e.g.,
in the search for an 'other-partition'.
FIXME: this is pretty ugly. maybe undo it and find a better way.
(TESTS_ENVIRONMENT): Invoke perl scripts with $(PERL), and use -T
if the script requires that. Otherwise, use $(SHELL).
* tests/misc/md5sum-newline: Create a file whose name contains
a newline in Perl (resort to using "system", since open refuses).
Fix old brokenness exposed by this change:
* tests/du/files0-from: Correct test not to rely on stdin
being attached to a non-tty.
* tests/misc/sort (3g, 3h, 3i): Likewise: add explicit empty input file.
Avoid warnings about using qw()-around-commas.
* tests/rm/fail-eperm: Now that this test is run from a temporary
subdirectory, adjust the full name of the "rm" program we're going
to run.
Change #!/bin/sh to #!/usr/bin/perl, and factor out the few lines
of boilerplate code to invoke perl. Do not "require 5.00x";
a configure-time Perl test handles that
* tests/dd/skip-seek:
* tests/misc/base64:
* tests/misc/basename:
* tests/misc/cut:
* tests/misc/date:
* tests/misc/dircolors:
* tests/misc/dirname:
* tests/misc/expand:
* tests/misc/expr:
* tests/misc/factor:
* tests/misc/fmt:
* tests/misc/fold:
* tests/misc/head:
* tests/misc/head-elide-tail:
* tests/misc/join:
* tests/misc/ls-misc:
* tests/misc/md5sum:
* tests/misc/md5sum-newline:
* tests/misc/mktemp:
* tests/misc/od:
* tests/misc/paste:
* tests/misc/pr:
* tests/misc/printf-cov:
* tests/misc/seq:
* tests/misc/sha1sum:
* tests/misc/sha1sum-vec:
* tests/misc/sha224sum:
* tests/misc/sha256sum:
* tests/misc/sha384sum:
* tests/misc/sha512sum:
* tests/misc/sort-merge:
* tests/misc/stat-printf:
* tests/misc/sum:
* tests/misc/tac:
* tests/misc/tail:
* tests/misc/test:
* tests/misc/test-diag:
* tests/misc/tr:
* tests/misc/tsort:
* tests/misc/tty-eof:
* tests/misc/unexpand:
* tests/misc/uniq:
* tests/misc/wc:
* tests/misc/wc-files0-from:
* tests/misc/xstrtol:
* tests/mv/i-1:
* tests/pr/pr-tests:
* tests/rm/empty-name:
* tests/rm/fail-eperm:
* tests/rm/unreadable:
