date -d "$(printf '\xb0')" would print 00:00:00 with today's date
rather than diagnosing the invalid input. Now it reports this:
date: invalid date '\260'
* gnulib: Update submodule to latest for fixed parse-datetime.y.
* tests/misc/date [invalid-high-bit-set]: New test.
* NEWS (Bug fixes): Mention it.
* bootstrap, tests/init.sh: Also update to latest.
Reported by Peter Evans in http://bugs.gnu.org/11843
* src/sort.c (check_inputs): A new function to verify all inputs
are accessible before further processing.
(check_output): A new function to open or create a specified
output file, before futher processing.
(stream_open): Adjust to truncating the previously opened
output file rather than opening directly.
(avoid_trashing_input): Optimize to stat the output file
descriptor, rather than the file name.
(main): Call the new functions to check accessibility of
inputs and output, before processing starts.
* tests/misc/sort: Adjust to the changed error message.
* tests/misc/sort-merge-fdlimit: Account for the earlier opened
file descriptor of the specified output file.
* tests/misc/sort-exit-early: A new test to exercise the improvements.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the improvement.
Suggested-by: Bernhard Voelker
* src/head.c (elide_tail_lines_seekable): Reset file pointer
after printing up to an end-relative line-counted offset.
Anoop Sharma reported the problem and suggested the fix.
* tests/misc/head-pos: Add coverage via a very similar, existing test.
Also add coverage for a previously untested block of code.
* tests/misc/head-elide-tail ($READ_BUFSIZE): Update to 8192, to
match the value of BUFSIZ I see today on Fedora 17/x86_64 (unrelated
to this fix).
* NEWS (Bug fixes): Mention it.
Improved-by: Pádraig Brady
* tests/misc/tty-eof: Increase timeout from 1s to 10s, to avoid
unwarranted failure under heavy load.
* tests/Makefile.am (TESTS): Move misc/tty-eof "up" to nearer the
beginning of the list (from near the middle) so that it is started
earlier in parallel test runs. Otherwise, it would frequently be
among the last two tests to complete.
Problem reported by Samuel Thibault in <http://bugs.gnu.org/11424>.
* NEWS: Document this.
* src/dd.c (skip): Handle skipping past EOF on shared or typed
memory objects the same way as with regular files.
(dd_copy): It's OK to truncate shared memory objects.
* src/du.c (duinfo_add): Check for overflow.
(print_only_size): Report overflow.
(process_file): Ignore negative file sizes in the --apparent-size case.
* src/od.c (skip): Fix comment about st_size.
* src/split.c (main):
* src/truncate.c (do_ftruncate, main):
On files where st_size is not portable, fall back on using lseek
with SEEK_END to determine the size. Although strictly speaking
POSIX says the behavior is implementation-defined, in practice
if lseek returns a nonnegative value it's a reasonable one to
use for the file size.
* src/system.h (usable_st_size): Symlinks have reliable st_size too.
* tests/misc/truncate-dir-fail: Don't assume that getting the size
of a dir is not allowed, as it's now allowed on many platforms,
e.g., GNU/Linux.
... i.e., don't use the getpw* functions.
Before this change, running groups or id with no user name argument
would include a group name or ID from /etc/passwd. Thus, under unusual
circumstances (default group is changed, but has not taken effect for a
given session), those programs could print a name or ID that is neither
real nor effective.
To demonstrate, run this:
echo 'for i in 1 2; do id -G; sleep 1.5; done' \
|su -s /bin/sh ftp - &
sleep 1; perl -pi -e 's/^(ftp❌\d+):(\d+)/$1:9876/' /etc/passwd
Those id -G commands printed the following:
50
50 9876
With this change, they print this:
50
50
Similarly, running those programs set-GID could make them
print one ID too many.
* src/group-list.c (print_group_list): When username is NULL, pass
egid, not getpwuid(ruid)->pw_gid), to xgetgroups, per the API
requirements of xgetgroups callee, mgetgroups.
When not using the password database, don't call getpwuid.
* NEWS (Bug fixes): Mention it.
* tests/misc/id-setgid: New file.
* tests/Makefile.am (TESTS): Add it.
(root_tests): It's a root-only test, so add it here, too.
Originally reported by Brynnen Owen as http://bugs.gnu.org/7320.
Raised again by Marc Mengel in http://bugzilla.redhat.com/816708.
* tests/Makefile.am (TESTS): Add misc/stty-pairs.
* tests/init.cfg (stty_reversible_init_): New function.
(stty_reversible_query_): New function.
* tests/misc/stty: Factor out expensive "pairs" code into new test.
Use new stty_reversible_* functions instead of evaluating static
REV_* variables.
* tests/misc/stty-pairs: Add new test. Code added from misc/stty.
Mark this as an expensive test. Skip 'parenb' and 'cread' options,
as these tests are known to fail. Like in misc/stty, also use
the new stty_reversible_* functions.
Accept -g for BSD/Plan9 compatibility.
* NEWS (New features): Mention it.
* tests/fmt/goal-option: New test.
* tests/fmt/long-line: Rename from tests/fmt-long-line.
* tests/fmt/base: Rename from tests/misc/fmt.
* doc/coreutils.texi: Document it.
* src/fmt.c (main): Accept the new option
(check_for_goals): new function to implement the operands
Based on BSD's and Plan-9's fmt programs.
* tests/misc/sort-discrim: Correct reversed args to "compare".
This nit was masked by a bug in maint.mk that effectively disabled
many of the syntax-check rules.
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
Most of the time, if someone wants to filter which paths are
relative while leaving all others absolute, they also want to
to the filtering based on the same --relative-to directory.
Make this easier to specify.
* src/realpath.c (main): Convert error to default.
* doc/coreutils.texi (realpath invocation): Document this.
* tests/misc/realpath: Adjust test to match.
* NEWS: Document it.
'realpath --relative-base --relative-to' is identical to
--relative-base=--relative-to, so the test wasn't covering what
it claimed. Expose recent fixes for handling of // on systems
where // is distinct, and for --relative-base=/. Add test that
exposes our design decision that --relative-base that is not a
prefix of --relative-to is a no-op (if we later change behavior,
we will also have to change that part of the test).
* tests/misc/realpath: Fix typo. Add some tests.
https://lists.gnu.org/archive/html/bug-gnulib/2012-02/msg00038.html
detailed a couple of bugs in gnulib's canonicalize that were visible
through coreutils' readlink, but only on systems where // is distinct
from /. This particular test assumes the POSIX fix which requires
canonicalization of a symlink containing just slashes to behave as
if slashes separating the symlink from the rest of the name are
elided (see http://austingroupbugs.net/view.php?id=541), as that is
the only useful (and current) behavior on Cygwin. That is,
ln -s / root
ls root/dev
must list the contents of /dev, not //dev.
* tests/misc/readlink-root: New test.
* tests/Makefile.am (TESTS): Run it.
* tests/Makefile.am (TESTS): Add misc/sort-discrim.
* tests/misc/sort-discrim: New file, which tests a discriminator-based
implementation of 'sort'. Coreutils doesn't use this implementation
yet, but the test is useful anyway.
Co-authored-by: Drew Kutilek <dkutilek@ucla.edu>
Co-authored-by: James Wendt <jwendt@cs.ucla.edu>
* src/dirname.c (main): Handle new -z option and manage more than one
argument.
* doc/coreutils.texi (dirname invocation): Mention it.
* NEWS (New features): Mention it.
* tests/misc/dirname: Add a two arguments test.
* src/basename.c (perform_basename): New function refactored from
main() that performs the basename work on a STRING, optionally
removes a trailing SUFFIX and outputs the result.
(main): Handle new options.
* doc/coreutils.texi (basename invocation): Mention new options.
* test/misc/basename: Add new options test cases.
* NEWS (New features): Mention it.
* src/realpath.c (path_common_prefix): Be consistent and
always include a leading '/' in the count returned.
(relpath): Account for the change in path_common_prefix()
and avoid outputting extra '/' chars in relative paths that
span the root dir.
* tests/misc/realpath: Add the two reported cases.
Reported by Mike Frysinger
Relax initial regexp to match more instances, but add a
filter to avoid some invalid conversions. Run this:
git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \
-e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \
-e ' s/\`([^'\''"]*?'\'')/'\''$1/g'
The last disjunct in the above (...) filter is to exempt
any line that contains this string: '\''
With quoting like that, converting a ` to ' is likely to cause trouble,
so we'll handle those manually. Here are three examples where
the exemption is required:
*': `link-to-dir/'\'': hard link not allowed for directory'*) ;;
printf 'creating file `%s'\''\n' $f
'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
Automatically adjust both the source (now in only one place)
and all tests that expect the resulting output via this:
git grep -l 'Try.*--help' src/system.h tests \
| xargs perl -pi -e 's/Try \\?`(\S+ --help)/Try '\''$1/'
* tests/misc/xstrtol: Use '...' to match new quoting in most places.
However, leave `9x' to match the sole comparison against output
from the quote function, which still uses `...'.
* tests/misc/sort-merge: Likewise, though here I had to leave
`...'-quoted output to match output from four tests.
* tests/pr/pr-tests: Convert a single `...' to '...'.
* gnulib: Update submodule to latest.
* tests/misc/timeout-parameters: Verify that the timer doesn't
fire immediately in the problematic range, and avoid overflow
checks in that case.
* man/timeout.x: Mention the possible bug.
Reported by Bruno Haible
This program is compatible with other realpath(1)
implementations, and also incorporates relpath like support,
through the --relative options. The relpath support
was suggested by Peng Yu, who also provided an initial
implemenation of that functionality.
* AUTHORS: Add my name.
* NEWS: Mention the new command.
* README: Likewise.
* doc/coreutils.texi (realpath invocation): Add realpath info.
* man/Makefile.am (realpath.1): Add dependency.
* man/realpath.x: New template.
* man/.gitignore: Ignore generated man page.
* po/POTFILES.in: Add src/realpath.c.
* src/.gitignore: Exclude realpath.
* src/Makefile.am (EXTRA_PROGRAMS): Add realpath.
* src/realpath.c: New file.
* scripts/git-hooks/commit-msg: Add realpath to the list of prefixes.
* tests/Makefile.am (TESTS): Add misc/realpath.
* tests/misc/realpath: New file.
