* tests/misc/read-errors.sh: Exercise more modes of
various utilities for better read error coverage.
* tests/split/fail.sh: Remove part refactored into the above test.
* tests/misc/tty-eof.pl: Ensure we don't erroneously
skip commands with parameters.
Comment as to why cut(1) is treated differently.
Adjust expect calls to not wait needlessly for cut output.
* src/wc.c (wc): Update the offset when not reading,
and do read if we can't update the offset.
* tests/misc/wc-proc.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/61300
* tests/misc/tee.sh: Call cleanup_ in all cases to ensure
there are no overlapping interactions on the fifo that
might impact later parts of the test. This was seen to
cause issue with dash on musl libc.
Addresses https://bugs.gnu.org/62542
* tests/misc/csplit-heap.sh: More memory is required to avoid
a false failure on some systems. Noticed with musl libc
with bash as the shell. This is confirmed to still easily
trigger with the original memory leak being tested.
Addresses https://bugs.gnu.org/62542
* src/wc.c (wc): Use INT_ADD_WRAPV() to detect overflow.
(main): Upon overflow, saturate the total, print a diagnostic,
and set exit status.
* tests/misc/wc-total.sh: Add a test case, which operates
on BTRFS and 64 bit systems at least.
Reported at https://bugs.debian.org/1027100
* NEWS: Mention the fix.
* src/dircolors.c: Fail upon read error from getline().
* tests/misc/dircolors.sh: Add a new test.
* tests/local.mk: Reference the new test.
This applies to all checksumming utilities,
where we incorrectly report all subsequent files as checking 'OK'
once any file has passed a digest check.
The exit status was not impacted, only the printed status.
* src/digest.c (digest_check): Use the correct state variable
to determine if the _current_ file has passed or not.
* tests/misc/md5sum.pl: Add a test case.
Fixes https://bugs.gnu.org/62403
Similarly to the fix to tests/rmdir/ignore.sh in c0e5f8c59,
tee should not be expected to fail when run with read-only outputs
when run as root.
* tests/misc/tee.sh: Add uid_is_privileged_ guard around test for
read-only outputs.
* tests/misc/tee.sh: AIX doesn't support detecting
closed outputs either with poll() or select() so avoid
testing that functionality.
* tests/tail-2/pipe-f.sh: Likewise.
Non blocking outputs can be seen for example
when piping telnet through tee to a terminal.
In that case telnet sets its input to nonblocking mode,
which results in tee's output being nonblocking,
in which case in may receive an EAGAIN error upon write().
The same issue was seen with mpirun.
The following can be used to reproduce this
locally at a terminal (in most invocations):
$ { dd iflag=nonblock count=0 status=none;
dd bs=10K count=10 if=/dev/zero status=none; } |
tee || echo fail >/dev/tty
* src/iopoll.c (iopoll_internal): A new function refactored from
iopoll(), to also support a mode where we check the output
descriptor is writeable.
(iopoll): Now refactored to just call iopoll_internal().
(fwait_for_nonblocking_write): A new internal function which
uses iopoll_internal() to wait for writeable output
if an EAGAIN or EWOULDBLOCK was received.
(fwrite_nonblock): An fwrite() wrapper which uses
fwait_for_nonblocking_write() to handle EAGAIN.
(fclose_nonblock): Likewise.
src/iopoll.h: Add fclose_nonblock, fwrite_nonblock.
src/tee.c: Call fclose_nonblock() and fwrite_nonblock wrappers,
instead of the standard functions.
* tests/misc/tee.sh: Add a test case.
* NEWS: Mention the improvement.
The idea was suggested by Kamil Dudka in
https://bugzilla.redhat.com/1615467
This was introduced recently with commit v9.1-166-g6b12e62d9
* src/tee.c (tee_files): Check the return from fopen()
before passing to fileno() etc.
* tests/misc/tee.sh: Add a test case.
--raw output is the most composable format, and also is a
robust way to discard the file name without parsing (escaped) output.
Examples:
$ cksum --raw -a crc "$afile" | basenc --base16
4ACFC4F0
$ cksum --raw -a crc "$afile" | basenc --base2msbf
01001010110011111100010011110000
$ cksum --raw -a sha256 "$bfile" | basenc --base32
AAAAAAAADHLGRHAILLQWLAY6SNH7OY5OI2RKNQLSWPY3MCUM4JXQ====
* doc/coreutils.texi (cksum invocation): Describe the new feature.
* src/digest.c (output_file): Inspect the new RAW_DIGEST global,
and output the bytes directly if set.
* src/cksum.c (output_crc): Likewise.
* src/sum.c (output_bsd, output_sysv): Likewise.
* tests/misc/cksum-raw.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the new feature.
* src/digest.c [HASH_ALGO_CKSUM]: Include "base64.h"
[HASH_ALGO_CKSUM] (base64_digest): New global.
[HASH_ALGO_CKSUM] (enum BASE64_DIGEST_OPTION): New enum.
[HASH_ALGO_CKSUM] (long_options): Add "base64".
(valid_digits): Rename from hex_digits, now taking an input length argument.
Adjust callers.
(bsd_split_3): Rename arg from hex_digits to digest.
Add new *d_len parameter for length of extracted digest.
Move "i" declaration down to first use.
(split_3): Rename arg from hex_digits to digest.
Add new *d_len parameter for length of extracted digest.
Instead of relying on "known" length of digest to find the following
must-be-whitespace byte, search for the first whitespace byte.
[HASH_ALGO_CKSUM] (output_file): Handle base64_digest.
[HASH_ALGO_CKSUM] (main): Set base64_digest.
[HASH_ALGO_CKSUM] (b64_equal): New function.
(hex_equal): New function, factored out of digest_check.
(digest_check) Factored part into b64_equal and hex_equal.
Rename local hex_digest to digest.
* tests/misc/cksum-base64.pl: Add tests.
* tests/local.mk (all_tests): Add to the list.
* cfg.mk (_cksum): Define.
(exclude_file_name_regexp--sc_prohibit_test_backticks): Exempt new test.
(exclude_file_name_regexp--sc_long_lines): Likewise.
* doc/coreutils.texi (cksum invocation): Document it.
(md5sum invocation) [--check]: Mention digest encoding auto-detect.
* NEWS (New Features): Mention this.
* src/dd.c (parse_integer): Support Q,R suffixes.
* src/od.c (main): Likewise.
* src/split.c (main): Likewise.
* src/stdbuf.c (parse_size): Likewise.
* src/truncate.c (main): Likewise.
* src/sort.c (specify_size_size): Likewise.
Also line length syntax check fix.
* tests/misc/numfmt.pl: Adust top end large number checks
to the new largest values.
* doc/coreutils.texi (numfmt invocation): Add a numfmt example.
* NEWS: Tweak to aid searchability.
* src/dd, src/head.c, src/od.c, src/sort.c, src/stdbuf.c, src/tail.c:
(usage):
* src/system.h (emit_size_note):
Mention new SI prefixes.
* src/du.c (main):
* src/head.c (head_file):
* src/numfmt.c (suffix_power, suffix_power_char, prepare_padded_number):
* src/shred.c (main):
* src/sort.c (unit_order):
* src/tail.c (parse_options):
Support new SI prefixes.
* src/numfmt.c (MAX_ACCEPTABLE_DIGITS): Increase to 33.
(zero_and_valid_suffixes, valid_suffixes): New constants,
with new SI prefixes.
(valid_suffix, unit_to_umax): Use them.
(prepare_padded_number): Diagnose "999Q" instead of "999Y".
* tests/misc/numfmt.pl, tests/misc/sort.pl:
Adjust tests to match new max.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
* src/stty.c (wrapf): Adjust the comparison by 1,
to account for the space we're adding.
* tests/misc/stty.sh: Add a test case.
* NEWS: Mention the fix.
Reported in https://bugs.debian.org/1027442
* src/wc.c (wc): Use off_t rather than size_t
when calculating where to seek to, so that
we don't seek to a too low offset on systems
where size_t < off_t, which would result in
many read() calls to determine the file size.
* tests/misc/wc-proc.sh: Add a test case
sufficient for 32 bit systems at least.
* NEWS: Mention the bug fix.
Reported at https://bugs.debian.org/1027101
Previously this was restricted to the C99 universal character subset,
which restricted most values <= 0x9F, as that simplifies the C lexer.
However printf(1) doesn't need this restriction.
Note also the bash builtin printf already supports all values <= 0x9F.
* src/printf.c (main): Relax the restriction on points <= 0x9F.
* doc/coreutils.texi (printf invocation): Adjust description.
* tests/misc/printf-cov.pl: Adjust accordingly. Add new cases.
* NEWS: Mention the change in behavior.
Reported at https://bugs.debian.org/1022857
* src/runcon.c (main): Call initialize_exit_failure(),
so we use an appropriate exit status upon failure to close stdout.
This should have been part of recent commit ea3ee6df.
* tests/misc/help-version.sh: Adjust test case accordingly.
without this option, control of when the total is output
is quite awkward. Consider trying to suppress the total line,
which could be achieved with something like:
wc-no-total() { wc "$@" /dev/null | head -n-2; }
As well as being non obvious, it's also non general.
It would give a non failure, but zero count if passed a file on stdin.
Also it doesn't work in conjunction with the --files0-from option,
which would need to be handled differently with something like:
{ find files -print0; printf '%s\0' /dev/null; } |
wc --files0-from=- |
head -n2
Also getting just the total can be awkward as file names
are only suppressed when processing stdin, and
also a total line is only printed if processing more than one file.
For completness this might be achieved currently with:
wc-only-total() {
wc "$@" |
tail -n1 |
sed 's/^ *//; s/ [^ 0-9]*$//'
}
* src/wc.c: Add new --total option.
* tests/misc/wc-total.sh: New test suite for the new option.
* tests/local.mk: Reference the new test.
* doc/coreutils.texi (wc invocation): Document the new option.
* THANKS.in: Add suggestor.
* NEWS: Mention the new feature.
* src/stty.c (apply_settings): Validate [io]speed arguments
against the internal accepted set.
(set_speed): Check the cfset[io]speed() return value so
that we validate against the system supported set.
* tests/misc/stty-invalid.sh: Add a test case.
* NEWS: Mention the bug fix.
Reported in https://bugs.debian.org/1018790
* src/comm.c (compare_files): Handle the single character
--output-delimeter case separately so that NUL is appropriately
handled.
* doc/coreutils.texi (comm invocation): Fix the description
of --output-delimiter to say an empty delimeter is treated
as a NUL separator, rather than being disallowed.
* tests/misc/comm.pl: Add a test case.
Reported at https://bugs.debian.org/1014008
* src/runcon.c: Use EXIT_CANCELED (125) instead of EXIT_FAILURE (1),
so that errors specific to runcon can be distinguished,
from those of the invoked program.
* doc/coreutils.texi (runcon invocation): Fix the Exit status
description to say we return 125 (not 127) for internal errors.
* tests/misc/runcon-no-reorder.sh: Add a test case.
* src/date.c: (main): Track and diagnose whether any
-d or -s options are dropped, as users may think
multiple options are supported, given they can be relative.
* tests/misc/date-debug.sh: Add a test case.
* NEWS: Mention the improvement.
* src/runcon.c (main): With -c avoid searching the path
to ensure the file specified to --compute is executed.
* tests/misc/runcon-compute.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
Reported in https://bugs.debian.org/1013924
When factoring numbers that have a large 2^n factor, it can be hard to
eyeball just how many 2's there are. Add an option to print each prime
power factor in the p^e format (omitting the exponent when it is 1).
* src/factor.c: Add -h, --exponents option for printing in p^e format.
* doc/coreutils.texi (factor invocation): Document the new option.
* tests/misc/factor.pl: Add test case.
* THANKS.in: Add previous suggester
(https://lists.gnu.org/r/coreutils/2017-11/msg00015.html).
Suggested-by: Emanuel Landeholm <emanuel.landeholm@gmail.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
* tests/misc/env.sh: Verify with another command that
execvp() doesn not return ENOENT, before testing the
exit code from the command in question.
* tests/misc/nice-fail.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/timeout-parameters.sh: Likewise.
* tests/misc/md5sum-newline.pl: Avoid binary '*' tags when
comparing checksums.
* tests/misc/md5sum-bsd.sh: Avoid binary '*' tags so that we correctly
trigger the ambiguity test.
Reported by Bruno Haible
* tests/misc/printf-mb.sh: Given we shortcut the single char
(invalid multi-byte) case, add a case to ensure we're correctly
checking the return from mbrtowc().
* src/printf.c (STRTOX): Update to support multi-byte chars.
* tests/misc/printf-mb.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.
Fixes https://bugs.gnu.org/54388
