* coreutils.texi (printf invocation): Add xref.
Use "The GNU C Library Reference Manual" as the name of the 'libc'
document consistently.
* man/printf.x: Add See also: printf(3).
Suggested by A. Costa in http://bugs.debian.org/465522
* src/install.c (announce_mkdir): Write verbose output to stdout,
not to stderr.
* src/mkdir.c (announce mkdir): Use prog_fprintf for verbose output.
* src/prog-fprintf.c (prog_fprintf): New function and file.
* src/prog-fprintf.h: New file.
* src/rmdir.c (main): Write verbose output to stdout, not to stderr.
Quote directory name in a diagnostic.
* src/rmdir.c (remove_parents): Write verbose output to stdout,
not to stderr.
* doc/coreutils.texi: Mention that shred verbose output is to stderr.
* NEWS: Mention the changes.
Signed-off-by: Ondřej Vašík <ovasik@redhat.com>
* src/join.c: Support --check-order and --nocheck-order.
New variables check_input_order, seen_unpairable and
issued_disorder_warning[]. For --check-order, verify that the
input files are in sorted order. For the default case, check the
order only if there are unpairable lines.
(join): Perform ordering checks after reaching EOF on either
input.
(usage): Mention --check-order and --nocheck-order.
(dupline): Save a copy of the previously-read input line so that
we can detect disorder on the input.
(get_line): Temporarily save a copy of the previous line (by
calling dupline) and check relative ordering (by calling
checkorder) before returning the newly-read line.
(getseq, join): Tell get_line which file we are reading from.
(advance_seq): New function, factoring out some of the code
commonly surrounding calls to getseq.
(checkorder): New function. Verifies that a pair of consecutive
input lines are in sorted order.
* doc/coreutils.texi (join invocation): Document the new options
--check-order and --nocheck-order.
* tests/join/Test.pm (tv): Added tests for --check-order and
--nocheck-order.
* NEWS: Mention this new feature.
* src/groups.c (main): New file, replacing groups.sh.
* src/group-list.c, src/group-list.h: New files, factored out of id.c,
implementing the functionality that "id" and "groups" have in common.
* src/id.c (print_full_info): Avoid a segfault when trying to print
an error message if getgroups fails.
(print_group_list): Move to group-list.c.
(print_group): Likewise.
* man/Makefile.am: When building groups.1, obtain the help text
from src/groups.c, not src/groups.sh.
(noinst_HEADERS): Add group-list.h.
(group): Remove rule.
(dist_man_MANS): Remove groups.1.
* doc/coreutils.texi (groups: Print group names a user is in):
Explain why "groups" and "groups $(id -un)" give different results
in existing login sessions after you change the group database.
(id: Print user identity): Likewise for "id".
* po/POTFILES.in: Add src/group-list.c and src/groups.c.
* NEWS: mention this.
* AUTHORS: Update.
* src/mkdir.c (verbose_output): New function.
(announce_mkdir): Use it.
* src/split.c (usage): Update.
* src/split.c (cwrite): Write to stdout, not stderr.
* doc/coreutils.texi (split invocation): Remove the mention
of --verbose output being printed to stderr.
* tests/mkdir/p-v: Redirect stdout, not stderr.
* tests/misc/split-a: Likewise.
* NEWS: Mention this change.
* TODO: Remove this item.
* doc/coreutils.texi (dd invocation): Say that dd prints stats
upon normal termination and upon SIGINT.
Signed-off-by: Jim Meyering <meyering@redhat.com>
* doc/coreutils.texi (mv invocation): Adjust the warning: moving a
dir-symlink-specified-with-a-trailing-slash works in a surprising
manner only on some systems. Reported by Tomas Pospisek in
http://bugs.debian.org/343652.
* doc/Makefile.am (sc-exponent-grouping):
(syntax_checks): New variable.
(sc-avoid-io, sc-avoid-non-zero, sc-avoid-timezone):
(sc-avoid-zeroes, sc-use-small-caps-NUL): New rules, extracted
from check-texinfo.
(check-texinfo): Depend on $(syntax_checks).
* NEWS: Mention this change.
* doc/coreutils.texi (cp invocation): Describe the new behavior.
* src/copy.c: No longer include "canonicalize.h".
(copy_reg): Upon failure to open a dangling destination symlink, don't
canonicalize the name, but rather fail (default) or, with POSIXLY_CORRECT,
repeat the open call without O_EXCL (potentially dangerous).
* src/copy.h (struct cp_options) [open_dangling_dest_symlink]:
New member. Reorder the others, grouping "bool" and "enum"
members together.
* tests/cp/thru-dangling: Test for changed and new behavior.
* src/cp.c (cp_option_init): Initialize new member.
* src/install.c (cp_option_init): Likewise.
* src/mv.c (cp_option_init): Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
* doc/coreutils.texi (date invocation):
`man date` gives all options for the date command except
the description of the date input formats. Therefore it
should be easy to browse to this info using `info date`.
Signed-off-by: Pádraig Brady <P@draigBrady.com>
* src/touch.c (usage): Improve wording of documentation regarding
file argument handling and special handling of - argument.
* doc/coreutils.texi (touch invocation): Likewise.
Documentation problem reported by Vincent Lefevre.
* NEWS: Mention arch.
* README: Add arch to the list of programs.
* AUTHORS: Add arch.
* src/uname.c: Include "uname.h".
(PROGRAM_NAME): Handle arch, too.
(ARCH_AUTHORS): Define.
(uname_long_options, arch_long_options): Renamed and new globals.
(usage): Handle arch-mode as well as uname-mode.
(decode_switches): New function, extracted from main,
to handle arch-mode as well as uname-mode.
(main): Handle both modes.
* src/uname-arch.c: New program, alias for "uname -m".
* src/uname-uname.c: New file, default uname mode.
* src/uname.h: New file, uname modes.
* src/Makefile.am (EXTRA_PROGRAMS): Add arch.
(uname_SOURCES, arch_SOURCES): Define.
* man/arch.x: New file.
* man/Makefile.am (dist_man_MANS): Add arch.1.
(arch.1): New dependency.
* tests/misc/arch: New test, compare "arch" with "uname -m"
* configure.ac (OPTIONAL_BIN_PROGS): Add arch.
(MAN): Add arch.1.
* .x-sc_require_config_h: Exempt uname-arch.c and uname-uname.c
from the always-include-<config.h> rule.
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jim Meyering <jim@meyering.net>
Here's a patch along the lines of
<http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/10849/focus=10857>.
It's a bit large since it changes the test cases to match the behavior,
and the test cases' file names depend on the behavior!
* NEWS: pr -F no longer suppresses the footer or the first two blank
lines in the header.
* doc/coreutils.texi (pr invocation): Likewise. Also, a too-short
page length implies -t, not -T.
* src/pr.c (lines_per_header, lines_per_footer): Now constants.
(init_parameters): Don't try to change them.
(print_header): Use the same header and footer format regardless of
wither form feeds are being used.
(usage): Adjust to above change when describing too-short page length.
Too-short page length impliesy -t, not -T.
* tests/pr/2-S_f-t_notab: Adjust to the fact that -F now affects
only formfeed handling; it does not change the header.
* tests/pr/2-Sf-t_notab: Likewise.
...
* tests/pr/3-5l17f-t: Remove, since it's been renamed to another
file whose name has a line count 7 larger,
reflecting the new line count needed for this behavior.
* tests/pr/3a3l8f-t: Likewise.
...
* tests/pr/w72l24f-ll: Likewise.
Signed-off-by: Jim Meyering <jim@meyering.net>
where it would not print the desired last number.
* doc/coreutils.texi (seq invocation): Remove advice about workaround
for seq off-by-one problem, since the bug is fixed now. Replace
it with more-generic advice about rounding errors.
* src/seq.c (long_double_format, print_numbers):
New arg NUMERIC_FORMAT. All uses changed.
* NEWS: "cp" no longer considers a destination symlink to be the
same as the referenced file when copying links or making backups.
* src/copy.c (copy_reg): When following a symlink, use the
followed name in later chown etc. requests, so that the created
file is affected, rather than the symlink. Use O_NOFOLLOW on
source when not dereferencing symlinks; this avoids a race.
Preserve errno correctly when doing multiple open attempts on the
destination.
(copy_internal): Follow destination symlinks only when copying a
regular file and only when we don't intend to remove or rename the
destination first, regardless of whether following source
symlinks; this is because since POSIX and tradition (e.g.,
FreeBSD) say we should ordinarily follow destination symlinks if
the system calls would ordinarily do so.
* src/copy.h (struct cp_options): Add comment that 'dereference'
is only for source files.
* src/cp.c (usage): Note that --derereference etc. are only for
source files.
(make_dir_parents_private): Follow symlinks, regardless of whether
--dereference is specified, because these are destination symlinks.
* tests/cp/same-file: Adjust tests to match revised behavior.
Filter out perror output since it might vary from host to host.
Use sed alone instead of also using echo.
* doc/coreutils.texi (cp invocation): Document the behavior better when
the destination is a symlink. Clarify source versus destination
symlinks. Describe the new behavior for destination symlinks.
2007-06-15 Jim Meyering <jim@meyering.net>
* src/copy.c: Include "canonicalize.h".
(copy_reg): Use canonicalize_filename_mode to follow the symlink,
so that we can always open with O_EXCL and avoid a race.
* doc/coreutils.texi (cat invocation): "Blank" lines actually mean
empty lines.
* src/cat.c (usage): Say that "nonblank" means nonempty. Clarify
--squeeze-blank.
* doc/coreutils.texi (Common options): Mention that -h and
--human-readable are equivalent to --block-size=human-readable.
Documentation problem reported by Steve Ward in
<http://lists.gnu.org/archive/html/bug-coreutils/2007-06/msg00007.html>.
(du invocation): Use optSi rather than duplicating the macro's
contents (incorrectly, since we claimed a "B" was output).
* Makefile.maint (copyright-check): Also check for an up-to-date
copyright year in doc/$().texi, if that file exists.
* doc/coreutils.texi: Add 2007 to list of Copyright years.
Reported by Karl Berry.
* NEWS: Mention uniq's new option: --zero-terminated (-z).
* src/uniq.c: Add new option, --zero-terminated (-z), to make
uniq use the NUL byte as separator/delimiter rather than newline.
(check_file): Add a parameter: delimiter. Update caller.
Use readlinebuffer_delim in place of readlinebuffer everywhere.
(main): Handle the new option.
(usage): Describe new option the same way sort does.
* doc/coreutils.texi (uniq invocation): Describe the new option.
