* bootstrap.conf (gnulib_modules): Add free-posix, tmpfile.
* src/split.c (copy_to_tmpfile): New function.
(input_file_size): Use it to split larger files when sizes cannot
easily be determined via fstat or lseek. See Bug#61386#235.
* tests/split/l-chunk.sh: Mark tests of /dev/zero as
very expensive since they exhaust /tmp.
* bootstrap.conf (gnulib_modules): Add count-leading-zeros,
which was already an indirect dependency, since ioblksize.h
now uses it directly.
* src/ioblksize.h: Include count-leading-zeros.h.
(io_blksize): Treat impossible blocksizes as IO_BUFSIZE.
When growing a blocksize to IO_BUFSIZE, keep it a multiple of the
stated blocksize. Work around the ZFS performance bug.
* NEWS: Mention the bug fix.
Problem reported by Korn Andras at https://bugs.gnu.org/59382
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
* bootstrap.conf (gnulib_modules): Remove alignof, which isn’t
needed since coreutils source modules don’t include alignof.h.
Add stdalign, since they depend on alignof working without
stdalign.h.
Move target directory code out of system.h to a new targetdir module.
This doesn’t change functionality.
* bootstrap.conf (gnulib_modules): Add targetdir.
* src/cp.c, src/install.c, src/mv.c: Include targetdir.h.
* src/system.h (must_be_working_directory, target_directory_operand)
(targetdir_dirfd_valid): Move from here ...
* gl/lib/targetdir.c, gl/lib/targetdir.h, gl/modules/targetdir:
... to these new files.
Use the new Gnulib modules alignalloc and xalignalloc
to simplify some memory allocation.
Also, fix some unlikely integer overflow problems.
* bootstrap.conf (gnulib_modules): Add alignalloc, xalignalloc.
* src/cat.c, src/copy.c, src/dd.c, src/shred.c, src/split.c:
Include alignalloc.h.
* src/cat.c (main):
* src/copy.c (copy_reg):
* src/dd.c (alloc_ibuf, alloc_obuf):
* src/shred.c (dopass):
* src/split.c (main):
Use alignalloc/xalignalloc/alignfree instead of doing page
alignment by hand.
* src/cat.c (main):
Check for integer overflow in page size calculations.
* src/dd.c (INPUT_BLOCK_SLOP, OUTPUT_BLOCK_SLOP, MAX_BLOCKSIZE):
(real_ibuf, real_obuf) [lint]:
Remove; no longer needed.
(cleanup) [lint]:
(scanargs): Simplify.
* src/ioblksize.h (io_blksize): Do not allow blocksizes largest
than the largest power of two that fits in idx_t and size_t.
* src/shred.c (PAGE_ALIGN_SLOP, PATTERNBUF_SIZE): Remove.
When copying to a directory, use functions like openat to access
the destination files, when such functions are available. This
should be more efficient and should avoid some race conditions.
* bootstrap.conf (gnulib_modules): Add areadlinkat-with-size,
fchmodat, fchownat, mkdirat, mkfifoat, utimensat.
* src/copy.c (lchown) [!HAVE_LCHOWN]:
* src/copy.c, src/system.h (rpl_mkfifo, mkfifo) [!HAVE_MKFIFO]:
Remove. All uses removed.
(utimens_symlink): Remove; we shouldn’t have to worry about
those obsolete systems any more. All uses replaced by utimensat.
* src/copy.c (copy_dir, set_owner, fchmod_or_lchmod, copy_reg)
(same_file_ok, writable_destination, overwrite_ok, abandon_move)
(create_hard_link, src_is_dst_backup, copy_internal, copy):
* src/cp.c (make_dir_parents_private, re_protect):
New args for directory-relative names. All uses changed.
Continue to pass full names as needed, for diagnostics and for
lower-level functions like qset_acl that do not support
directory-relative names.
* src/copy.c (copy_reg): Prefer readlinkat to lstatat for merely
checking whether a file is a symlink, to avoid EOVERFLOW issues.
(subst_suffix): New function.
(create_hard_link): Accept a null SRC_NAME as meaning that if it
is needed it needs to be constructed from SRC_RELNAME, DST_NAME,
and DST_RELNAME.
(source_is_dst_backup): Use subst_suffix instead of doing it by hand.
(copy_internal): Remember and use directory-relative names instead
of full names.
* src/cp.c (lchown) [!HAVE_LCHOWN]: Remove. All uses removed.
(must_be_working_directory): New function.
(target_directory_operand): Simply take file name as arg,
and return a file descriptor or negative number on failure;
open with O_DIRECTORY to obtain any file descriptor.
All uses changed.
(target_dirfd_valid): New function.
(do_copy): Use these new functions to obtain a file descriptor
for any target directory, and use directory-relative names
for that directory.
(main): Omit no-longer-needed stat when --target-directory,
as do_copy now does this.
* src/ln.c (O_PATHSEARCH): Move from here ...
* src/system.h: ... to here.
* tests/cp/fail-perm.sh: Adjust to change in diagnostic wording,
and add a test for --no-target-directory.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* NEWS, doc/coreutils.texi: Mention this.
* bootstrap.conf (gnulib_modules): Add gettime-res.
* src/date.c (res_width, adjust_resolution): New functions.
(main): Adjust %-N to be %9N, or whatever, before using it.
* bootstrap.conf (gnulib_modules): Remove
non-recursive-gnulib-prefix-hack.
(gnulib_tool_option_extras): Add --automake-subdir.
(bootstrap_post_import_hook): No need to massage lib/gnulib.mk.
This will help us make the transition to C2x, where some
attributes must come at the start of function decls.
Leave the attributes alone in .h files for now,
as the Gnulib tradition is to not expose attribute.h to users.
* bootstrap.conf (gnulib_modules): Add ‘attribute’.
* gl/lib/randperm.c, src/make-prime-list.c, src/system.h:
Include attribute.h.
* gl/lib/strnumcmp.c (strnumcmp): Remove _GL_ATTRIBUTE_PURE here,
as this belongs in the .h file.
* gl/lib/strnumcmp.h (strnumcmp): Add _GL_ATTRIBUTE_PURE here.
* src/sort.c (human_numcompare, numcompare): Now ATTRIBUTE_PURE;
discovered due to strnumcmp.h change.
* gl/lib/randperm.c, src/copy.c, src/dd.c, src/df.c, src/digest.c:
* src/env.c, src/expr.c, src/factor.c, src/ls.c:
* src/make-prime-list.c, src/numfmt.c, src/od.c, src/pathchk.c:
* src/pinky.c, src/pr.c, src/ptx.c, src/realpath.c, src/relpath.c:
* src/seq.c, src/sort.c, src/stat.c, src/stty.c, src/system.h:
* src/tr.c, src/uniq.c, src/wc.c:
In .c files, crefer ATTRIBUTE_CONST to _GL_ATTRIBUTE_CONST, and
similarly for ATTRIBUTE_FORMAT and ATTRIBUTE_PURE.
* src/system.h (FALLTHROUGH): Remove; attribute.h defines it.
* bootstrap.conf: We only need poll on Linux and AIX
where poll is not replaced. Also resinstate dependence
on select so we can use it unconditionally.
* src/tail.c (check_output_alive): Reinstate use of select()
by default as poll was seen to be ineffective for this
application on macOS.
Fixes https://bugs.gnu.org/50714
Add message digest sm3, which uses the OSCCA SM3 secure
hash (OSCCA GM/T 0004-2012 SM3) generic hash transformation.
* bootstrap.conf: Add the sm3 module.
* doc/coreutils.texi: Mention the cksum -a option.
* src/digest.c: Provide support for --algorithm='sm3'.
* tests/misc/sm3sum.pl: Add a new test (from Tianjia Zhang)
* tests/local.mk: Reference the new test.
* NEWS: Mention the new feature.
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
This fixes an unlikely stack out-of-bounds write reported by
Stepan Broz via Kamil Dudka (Bug#49209).
* bootstrap.conf (gnulib_modules): Replace select with poll.
* src/tail.c: Do not include <sys/select.h>.
[!_AIX]: Include poll.h.
(check_output_alive) [!_AIX]: Use poll instead of select.
(tail_forever_inotify): Likewise. Simplify logic, as there is no
need for a ‘while (len <= evbuf_off)’ loop.
* bootstrap.conf (gnulib_modules): Add idx.
* src/env.c: Include idx.h, minmax.h.
Prefer idx_t to ptrdiff_t when values are nonnegative.
(valid_escape_sequence, escape_char, validate_split_str)
(CHECK_START_NEW_ARG):
Remove; no longer needed now that we validate as we go.
(struct splitbuf): New type.
(splitbuf_grow, splitbuf_append_byte, check_start_new_arg)
(splitbuf_finishup): New functions.
(build_argv): New arg ARGC. Validate and process in one go, using
the new functions; this is simpler and more reliable than the old
approach (as witness the recent bug). Avoid integer overflow in
the unlikely case where the string contains more than INT_MAX
arguments.
(parse_split_string): Simplify by exploiting the new build_argv.
The diacrit module is obsolete, and ptx’s use of it is obsolete
too; it assumes an 8-bit locale (not that common these days) and
that TeX cannot process the 8-bit characters (nowadays, it can).
* NEWS, doc/coreutils.texi (Charset selection in ptx): Document this.
* bootstrap.conf (gnulib_modules): Remove diacrit.
* src/ptx.c: Do not include diacrit.h.
(print_field, fix_output_parameters): Remove obsolete support
for 8-bit diacritics.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
A 100MB file improves from 2.50s to 1.80s on a Sparc T5220
A 100MB file improves from 0.54s to 0.13s on an i3-2310M
* bootstrap.conf: Explicitly depend on byteswap,
since now used directly by coreutils.
* src/cksum.c (cksum): Process in multiples of 8 bytes.
(main): Adjust for generation of expanded crctab.
* src/cksum.h: Split now larger crctab to separate header.
* src/local.mk: Reference the new header.
* NEWS: Mention the improvement.
This lets use assume multiple-precision arithmetic on all
platforms, simplifying the code.
* bootstrap.conf (gnulib_modules): Add libgmp.
* configure.ac: Don’t call cu_GMP, as this is now done by Gnulib.
* m4/gmp.m4: Remove.
* src/expr.c, src/factor.c: Use gmp.h unconditionally.
* src/factor.c: Use the simpler ‘#ifndef mpz_inits’ to
determine whether there is an mpz_inits macro.
Update gnulib submodule to latest and use its new features.
Gnulib’s new getentropy module means coreutils can now assume
getentropy instead of approximating it, badly in some cases.
Gnulib’s improvements to the tempname module mean coreutils no
longer needs to maintain private patches.
* bootstrap.conf (gnulib_modules): Remove gettimeofday.
* gl/lib/randread.c (NAME_OF_NONCE_DEVICE): Remove.
(get_nonce): Return success indicator. Remove bytes_bound arg.
All callers changed. Rewrite by using getentropy instead of
reading the nonce device and falling back on gettimeofday.
Fail if getentropy fails.
(randread_new): Return NULL (setting errno) if get_nonce fails.
All callers changed.
* gl/lib/tempname.c.diff, gl/lib/tempname.h.diff:
* gl/modules/tempname.diff: Remove.
* gl/modules/randread (Depends-on):
Depend on getentropy, not gettimeofday.
* src/ptx.c (swallow_file_in_memory):
* src/shuf.c (read_input):
Adjust to read_file changes in Gnulib.
* src/shred.c (main):
* src/shuf.c (main):
* src/sort.c (random_md5_state_init):
Diagnose the new form of randread_new failures: randread_new can
fail now when !random_source, meaning getentropy failed.
Since the previous gnulib update, bootstrap outputs this warning:
Notice from module fdl:
Don't use this module! Instead, copy the referenced license file \
into your version control repository.
See gnulib commit:
https://git.sv.gnu.org/cgit/gnulib.git/commit/?id=88fc5afbccc9
* bootstrap.conf (gnulib_modules): Remove 'fdl'.
* doc/fdl.texi: Add file as a copy of 'gnulib/doc/fdl.texi'.
* doc/.gitignore (/fdl.texi): Remove entry.
* cfg.mk (FILTER_LONG_LINES): Add pattern for the 'fdl.texi' file.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* src/wc.c (iswnbspace): A new function to match
characters in this class.
(isnbspace): Likewise for single byte charsets.
(main): Initialize posixly_correct from the environment,
to allow disabling honoring NBSP in non C locales.
(wc): Call is[w]nbspace() along with is[w]space.
* bootstrap.conf: Ensure btowc is available.
* tests/misc/wc-nbsp.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the change in behavior.
* gnulib: Update to make the new strtold module available.
* bootstrap.conf: strtod is now a dependency of c-strtod,
which in turn is a dependency of cl-strtod. This treats
strtold and strtod similarly.
* gl/lib/cl-strtod.c: Adjust to assume strtold is available.
* tests/misc/sort-float.sh: Likewise.
* src/sort.c: Likewise.
(nan_compare): Adjust comment to indicate
we still have to init padding bits as per
https://sourceware.org/bugzilla/show_bug.cgi?id=13246
bootstrap.conf: Explicitly depend on select, rather than transitively.
* src/tail.c: Unconditionally include select.h as we use select()
outside inotify contexts now.
These commands now accept floating-point numbers in the
current locale, as well as in the C locale.
Compatibility problem reported by Robert Elz.
* NEWS: Document this.
* bootstrap.conf (gnulib_modules): Add cl-strtod, cl-strtold.
Remove c-strtold.
* doc/coreutils.texi (Floating point, tail invocation)
(printf invocation, timeout invocation, sleep invocation)
(seq invocation): Document this.
* gl/lib/cl-strtod.c, gl/lib/cl-strtod.h, gl/lib/cl-strtold.c:
* gl/modules/cl-strtod, gl/modules/cl-strtold: New files.
* src/printf.c, src/seq.c, src/sleep.c, src/tail.c, src/timeout.c:
Include cl-strtod.h instead of c-strtod.
* src/printf.c (vstrtold):
* src/seq.c (scan_arg, print_numbers):
* src/sleep.c (main):
* src/tail.c (parse_options):
* src/timeout.c (parse_duration):
Use cl_strtold instead of c_strtold.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Open a target directory and use its file descriptor in linkat,
symlinkat, etc. syscalls, instead of constructing long file names
by concatenating the target directory name to a basename.
This avoids O(N²) behavior with ‘ln F1 F2 ... Fn DIR’ when DIR is
a long file name with many slashes. It also avoids some races if
DIR is renamed while ln is running.
* bootstrap.conf (gnulib_modules): Add openat-safer.
* src/ln.c: Include fcntl-safer.h.
(O_PATHSEARCH): New constant.
(errno_nonexisting, target_directory_operand): Remove; no longer used.
(atomic_link, do_link): New arg DESTDIR_FD. All uses changed.
(do_link): New arg DEST_BASE. All uses changed.
(main): Open target directory and use its file descriptor
as DESTDIR_FD.
Previously, 'ln A B' did 'stat("B"), lstat("A"), link("A","B")'
where the stat and lstat were necessary to avoid hard-linking
directories on systems that can hard-link directories.
Now, in situations that prohibit hard links to directories,
'ln A B' merely does 'link("A","B")'. The new behavior
avoids some races and should be more efficient.
This patch was inspired by Bug#10020, which was about 'ln'.
* bootstrap.conf (gnulib_modules): Add unlinkdir.
* src/force-link.c (force_linkat, force_symlinkat): New arg for
error number of previous try. Return error number, 0, or -1 if
error, success, or success after removal. All callers changed.
* src/ln.c: Include priv-set.h, unlinkdir.h.
(beware_hard_dir_link): New static var.
(errnoize, atomic_link): New functions.
(target_directory_operand): Use errnoize for simplicity.
(do_link): New arg for error number of previous try. All callers
changed. Do each link atomically if possible.
(main): Do -r check earlier. Remove linkdir privileges so we can
use a single linkat/symlinkat instead of a racy substitute for the
common case of 'ln A B' and 'ln -s A B'. Set beware_hard_dir_link
to disable this optimization.
* gnulib: Update to latest.
* .gitignore: Add new entries.
* bootstrap.conf: Enable wchar-single, which will enable more
efficient replacements of wcwidth and mbrtowc, as we indicate
that the charset will no change between invocations of these functions.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Use O_CLOEXEC when creating file descriptors, so that subsidiary
processes do not inherit file descriptors that they do not need.
This is helpful for ‘sort’, as it is a multithreaded program that
forks and execs.
* bootstrap.conf (gnulib_modules): Add mkostemp, open, pipe2.
* src/sort.c (create_temp_file): Open temporary file with O_CLOEXEC.
(stream_open): Open the stream with O_CLOEXEC.
(pipe_fork): Create the pipe with O_CLOEXEC.
(check_output): Open the output file with O_CLOEXEC.
(main): Use xfopen/xfclose to handle --files0-from, so that
O_CLOEXEC is used properly. This is simpler anyway.
* tests/misc/sort-files0-from.pl: Adjust to change in diagnostic
wording.
