* NEWS: Mention the %%-in-format bug fix.
* src/seq.c (struct layout): New type.
(long_double_format): New arg LAYOUT. Fill it in. Fix mishandling
of %% in formats.
(print_numbers): New arg LAYOUT. Don't convert LAST to output format
when deciding whether to go slightly past LAST. Instead, convert
X to output format and back. This fixes a bug reported by
Andreas Schwab in
<http://lists.gnu.org/archive/html/bug-coreutils/2007-10/msg00237.html>
where "seq 10.8 0.1 10.95" would output 11.0 on platforms where
10.95 rounds to a value that prints as 11.0 when only one digit
past the decimal point is asked for.
(main): Compute layout, for benefit of print_numbers.
* tests/misc/seq (float-3): Undo previous change, since the bug
should be fixed now.
(fmt-b): New test, for the %% bug.
* tests/misc/seq (float-3): Use 10.94 as the endpoint, not 10.95,
since 10.95 was precisely in the middle of the interval, and with
a %.1f format could map to either 10.9 or 11.0.
Reported by Mike Frysinger
* tests/test-lib.sh (require_ulimit_): New function.
* tests/misc/printf-surprise: Use ulimit -v to trigger the fixed bug,
and rather than checking printf's exit status (which would go wrong
on FreeBSD 6.1, since their printf(3) function doesn't require
lots of memory in this case) simply test whether it outputs
the first 10 bytes.
* tests/help-version: Move to...
* tests/misc/help-version: ...here.
Source test-lib.sh, as usual.
Use $abs_top_builddir, rather than ".." and "../..".
* tests/test-lib.sh (require_selinux_): New function.
* tests/misc/chcon: Use it.
* tests/misc/selinux: Use it here, too.
* tests/cp/cp-a-selinux: and here.
* tests/selinux: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove selinux.
Reported by Mike Frysinger and Bauke Jan Douma.
* NEWS: Mention this.
* README: Add mktemp to the list.
* AUTHORS: Add this: mktemp: Jim Meyering
* src/mktemp.c: New file.
* src/Makefile.am (bin_PROGRAMS): Add mktemp.
(mktemp_LDADD): Add $(LIB_GETHRXTIME).
* man/mktemp.x: New file.
* man/Makefile.am (dist_man_MANS): Add mktemp.1.
(mktemp.1): New dependency.
* man/.cvsignore: Add mktemp.1.
* man/.gitignore: New file.
* src/.cvsignore, src/.gitignore: Add mktemp.
* tests/misc/mktemp: New file.
* tests/misc/Makefile.am (TESTS): Add mktemp.
* tests/Coreutils.pm (run_tests): Give the POST-test function
access to stdout and stderr contents, so it can verify that
the named-on-stdout file/dir does indeed exist and has proper
permissions, etc.
[po/ChangeLog]
* POTFILES.in: Add src/mktemp.c.
* tests/check.mk (TESTS_ENVIRONMENT): Add PACKAGE_VERSION here,
rather than in every Makefile.am that needs it.
* tests/rm/Makefile.am (TESTS_ENVIRONMENT): Remove PACKAGE_VERSION.
* tests/misc/Makefile.am (TESTS_ENVIRONMENT): Likewise.
* tests/misc/readlink-fp-loop: New file. Test for the readlink bug
fixed through today's change to Gnulib's canonicalize module.
* tests/misc/Makefile.am (TESTS): Add readlink-fp-loop.
Bug report and a test case from mpb.mail@gmail.com.
tests/check.mk (top_srcdir): Define.
tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir),
$(abs_top_srcdir), and $(abs_top_builddir), since they're
defined via the included tests/check.mk.
* tests/tee/basic: Move this file to ...
* tests/misc/tee: ...here. Don't rely on $PROG in env.
* tests/tee/dash: Move this file to ...
* tests/misc/tee-dash: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add tee.
* tests/Makefile.am (SUBDIRS): Remove tee.
* tests/tee: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/tee/Makefile
* tests/sum/basic-1: Move this file to ...
* tests/misc/sum: ...here. Don't rely on $PROG in env.
* tests/sum/sysv: Move this file to ...
* tests/misc/sum-sysv: ...here. Adapt it to use test-lib.sh.
* tests/misc/Makefile.am (TESTS): Add sum and sum-sysv.
* tests/Makefile.am (SUBDIRS): Remove sum.
* tests/sum: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/sum/Makefile.
* build-aux/check.mk: New file, from The Vaucanson Group.
* .x-sc_GPL_version: New file, to allow "version 2 or later"
in build-aux/check.mk.
* Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version.
* tests/check.mk: New file.
* tests/Makefile.am (EXTRA_DIST): Add check.mk, mkdtemp and test-lib.sh.
Begin factoring "sample-test" out of test scripts.
* tests/test-lib.sh: New file, to be sourced by all tests that
were previously derived from the "sample-test" template.
* tests/mkdtemp: New file.
* tests/touch/dir-1: Use test-lib.sh.
* tests/touch/empty-file: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/no-rights: Likewise. Also, don't sleep.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
* tests/touch/Makefile.am: Include $(top_srcdir)/tests/check.mk,
to get the parallel-"make check" bits.
Move a slow test into tests/misc.
* tests/check.mk: Wrapper.
* tests/ls/time-1: Move this file to tests/misc/ls-time.
* tests/misc/ls-time: New file. From tests/ls/time-1.
* tests/ls/Makefile.am (TESTS): Remove time-1.
* tests/misc/Makefile.am (TESTS): Add ls-time.
* tests/CuTmpdir.pm: New file.
* tests/Makefile.am (EXTRA_DIST): Add CuTmpdir.pm.
* tests/misc/od, tests/misc/base64, tests/misc/basename:
* tests/misc/cut, tests/misc/date, tests/misc/dirname:
* tests/misc/expand, tests/misc/fold, tests/misc/head-elide-tail:
* tests/misc/paste-no-nl, tests/misc/pr, tests/misc/sha224sum:
* tests/misc/sha256sum, tests/misc/sha384sum, tests/misc/sha512sum:
* tests/misc/sort-merge, tests/misc/stat-printf, tests/misc/test-diag:
* tests/misc/wc-files0-from, tests/misc/xstrtol:
* tests/dd/skip-seek, tests/dircolors/simple, tests/du/files0-from:
* tests/expr/basic, tests/factor/basic, tests/fmt/basic:
* tests/ls-2/tests, tests/md5sum/basic-1, tests/md5sum/newline-1:
* tests/seq/basic, tests/sha1sum/basic-1, tests/sha1sum/sample-vec:
* tests/sum/basic-1, tests/tsort/basic-1, tests/unexpand/basic-1:
* tests/mv/i-1, tests/rm/empty-name, tests/rm/unreadable: Use it.
* tests/misc/test-diag: Use "$ENV{abs_top_builddir}/src/test",
not "../../src/test", so it works when run from a subdirectory.
* tests/ls-2/tests: Create temp files and dirs from within the perl
script, so that they're removed, when run from a subdirectory.
* tests/misc/od: Perform od-zero-len's test here.
Include boilerplate code, so tests run in a subdirectory.
* tests/misc/od-zero-len: Remove this file.
* src/od.c (skip): Don't let kernel misinformation (nonempty files
in /proc with stat.st_size == 0) make "od -j N" misbehave.
Patch by Paul Eggert.
* NEWS: Document this work-around.
* tests/misc/od-zero-len: New file, test for the above.
Jim Meyering wrote:
> so if your test were to run sort -R twice, and compare *those* outputs,
> then it would trigger on this bug.
Thanks. I don't have a system with the failure so I was working
blind. Here is a rework of the patch.
Bob
>From 76dafb0dde4f8d685eb2b4b43fbf3c1cf9f0ff4b Mon Sep 17 00:00:00 2001
From: Bob Proulx <bob@proulx.com>
Date: Thu, 26 Jul 2007 02:19:49 -0600
Subject: [PATCH] sort: Improve sort --random-sort test.
* tests/misc/sort-rand: If "locale" is available pick a random
non-C locale and check "sort --random-sort" behavior using it.
Signed-off-by: Bob Proulx <bob@proulx.com>
