* maint.mk (VC_LIST): Prepend '$(srcdir)/'.
(patch-check): Fix to make it work with a VPATH build.
* src/Makefile.am (sc_tight_scope): Likewise.
* man/Makefile.am (.x.1): Do not make outputs unwritable.
* AUTHORS: Register as the author
* NEWS: Mention this change
* README: Add truncate command to list
* src/truncate.c: New command
* src/Makefile.am: Add truncate command to list to build
* src/.gitignore: Add truncate binary to list to ignore
* doc/coreutils.texi (truncate invocation): Add truncate info
* man/Makefile.am: Add truncate man page to list to build
* man/truncate.x: Add truncate man page template
* po/POTFILES.in: Add truncate to list to translate
* tests/Makefile.am: Add truncate tests
* tests/misc/help-version: Add support for new truncate command
* tests/misc/truncate-dangling-symlink: check dangling link ok
* tests/misc/truncate-dir-fail: ensure dirs fail
* tests/misc/truncate-fail-diag: validate messages for missing paths
* tests/misc/truncate-fifo: ensure fifos ignored
* tests/misc/truncate-no-create-missing: ensure -c option honoured
* tests/misc/truncate-overflow: check signed integer overflows
* tests/misc/truncate-owned-by-other: root permissions check
* tests/misc/truncate-parameters: check invalid parameter combinations
* tests/misc/truncate-relative: check invalid relative sizes
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add timeout command to list.
* src/timeout.c: New file.
* src/kill.c (operand2sig): Move function to its own file,
now that timeout.c will also use it.
* src/operand2sig.c (operand2sig): New file, extracted from kill.c.
* src/operand2sig.h (operand2sig): Declare.
* src/Makefile.am (EXTRA_PROGRAMS): Add timeout.
* src/.gitignore: Add timeout binary to list to ignore.
* doc/coreutils.texi (timeout invocation): Add timeout info.
(Signal specifications): New section, also referenced by kill.
* man/Makefile.am (timeout.1): Add dependency.
* man/timeout.x: New file.
* po/POTFILES.in: Add timeout.c and operand2sig.c to list to translate.
* tests/Makefile.am (TESTS): Add the two new tests.
* tests/misc/help-version: Add support for new timeout command.
* tests/misc/invalid-opt: Add support for new timeout command.
* tests/misc/timeout: New file: check basic timeout operation.
* tests/misc/timeout-parameters: New file: check invalid parameter
combinations.
* man/help2man: Do pull LC_ALL via "use POSIX".
Instead, limit the importing of gettext-related symbols
to just those two we'll use: gettext and textdomain.
Avoid failure that produced this diagnostic:
Constant subroutine main::LC_ALL redefined at /.../Exporter.pm
* man/help2man: Don't include LC_ALL in the "use POSIX" list,
since Locale::gettext->import will get it.
* coreutils.texi (printf invocation): Add xref.
Use "The GNU C Library Reference Manual" as the name of the 'libc'
document consistently.
* man/printf.x: Add See also: printf(3).
Suggested by A. Costa in http://bugs.debian.org/465522
* man/Makefile.am (dist_man_MANS): Add a literal, rm.1.
Without this, "make install" would not install man pages.
However, with this kludge, the rm.1 man page is installed
even when you configure with --enable-no-install-program=rm.
Revert 4b544e447e.
* man/Makefile.am: That change was only a band-aid. It solved
the stated problem, but not a deeper one: that "make install"
would no longer man pages. Reported by Dmitry V. Levin.
The latter problem arose in
167b8025ac with the removal of
the sole literal from the definition of dist_man_MANS. When
automake perceives dist_man_MANS as empty, it no longer emits
the install-man* rules.
* src/groups.c (main): New file, replacing groups.sh.
* src/group-list.c, src/group-list.h: New files, factored out of id.c,
implementing the functionality that "id" and "groups" have in common.
* src/id.c (print_full_info): Avoid a segfault when trying to print
an error message if getgroups fails.
(print_group_list): Move to group-list.c.
(print_group): Likewise.
* man/Makefile.am: When building groups.1, obtain the help text
from src/groups.c, not src/groups.sh.
(noinst_HEADERS): Add group-list.h.
(group): Remove rule.
(dist_man_MANS): Remove groups.1.
* doc/coreutils.texi (groups: Print group names a user is in):
Explain why "groups" and "groups $(id -un)" give different results
in existing login sessions after you change the group database.
(id: Print user identity): Likewise for "id".
* po/POTFILES.in: Add src/group-list.c and src/groups.c.
* NEWS: mention this.
* AUTHORS: Update.
* Makefile.am (EXTRA_DIST): Add .version.
(.version): New rule.
(dist-hook): Don't create $(distdir)/.version here, now that it's
being distributed.
* man/Makefile.am (common_dep): Use ../.version, not ../VERSION.
(../VERSION): Remove rule.
* GNUmakefile (dummy): Create .version, not VERSION.
Add an extra "...:= $(shell..." statement to ensure that
.version exists even when the preceding code is not run.
* .gitignore: Remove both .version and VERSION.
Signed-off-by: Jim Meyering <meyering@redhat.com>
rather than just "info PROG". The latter would often fail
or simply display the man page.
* man/help2man: Change the template.
Prompted by http://bugs.debian.org/399684
* man/Makefile.am (common_dep): Don't depend on configure.ac for
version changes. Instead, depend on ../VERSION.
(../VERSION): New rule.
* Makefile.am (DISTCLEANFILES): Define.
* GNUmakefile: Update ./VERSION.
* .gitignore: List VERSION.
Reported by Sven Joachim.
* man/Makefile.am (distcheck-hook): Make check rules dependents of
this target, not of check-local, so that people aren't distracted by
failures due to programs omitted via --enable-no-install-program=...
* NEWS: Mention this.
* README: Add mktemp to the list.
* AUTHORS: Add this: mktemp: Jim Meyering
* src/mktemp.c: New file.
* src/Makefile.am (bin_PROGRAMS): Add mktemp.
(mktemp_LDADD): Add $(LIB_GETHRXTIME).
* man/mktemp.x: New file.
* man/Makefile.am (dist_man_MANS): Add mktemp.1.
(mktemp.1): New dependency.
* man/.cvsignore: Add mktemp.1.
* man/.gitignore: New file.
* src/.cvsignore, src/.gitignore: Add mktemp.
* tests/misc/mktemp: New file.
* tests/misc/Makefile.am (TESTS): Add mktemp.
* tests/Coreutils.pm (run_tests): Give the POST-test function
access to stdout and stderr contents, so it can verify that
the named-on-stdout file/dir does indeed exist and has proper
permissions, etc.
[po/ChangeLog]
* POTFILES.in: Add src/mktemp.c.
* NEWS: Mention new configure-time options.
Mention that neither arch nor su is built/installed, by default.
* m4/include-exclude-prog.m4: New file.
* configure.ac: Use new macro, gl_ADD_PROG, rather than
manually appending to OPTIONAL_BIN_PROGS and MAN.
Move the code that adds "df" to the list of programs to build from
m4/jm-macros into this file.
Use gl_INCLUDE_EXCLUDE_PROG, then handle special cases: ginstall, [.
(NO_INSTALL_PROGS_DEFAULT): AC_SUBST it. Used by man/Makefile.am.
* man/Makefile.am (dist_man_MANS): Remove from this list all man pages
corresponding to "bin" programs. Add $(MAN) instead.
(optional_mans): Remove all uses.
(check-x-vs-1): Adapt to work even though arch and su are typically
no longer built (and neither are their .1 files).
* src/Makefile.am (install_su): Rename from INSTALL_SU, now that
INSTALL_SU has a different meaning. Use the new $(INSTALL_SU) value.
* NEWS: Mention arch.
* README: Add arch to the list of programs.
* AUTHORS: Add arch.
* src/uname.c: Include "uname.h".
(PROGRAM_NAME): Handle arch, too.
(ARCH_AUTHORS): Define.
(uname_long_options, arch_long_options): Renamed and new globals.
(usage): Handle arch-mode as well as uname-mode.
(decode_switches): New function, extracted from main,
to handle arch-mode as well as uname-mode.
(main): Handle both modes.
* src/uname-arch.c: New program, alias for "uname -m".
* src/uname-uname.c: New file, default uname mode.
* src/uname.h: New file, uname modes.
* src/Makefile.am (EXTRA_PROGRAMS): Add arch.
(uname_SOURCES, arch_SOURCES): Define.
* man/arch.x: New file.
* man/Makefile.am (dist_man_MANS): Add arch.1.
(arch.1): New dependency.
* tests/misc/arch: New test, compare "arch" with "uname -m"
* configure.ac (OPTIONAL_BIN_PROGS): Add arch.
(MAN): Add arch.1.
* .x-sc_require_config_h: Exempt uname-arch.c and uname-uname.c
from the always-include-<config.h> rule.
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jim Meyering <jim@meyering.net>
* man/Makefile.am (dist_man_MANS): Replace all optional manpages
with `$(MAN)', computed at configure time; also, list them ...
(optional_mans): ... in this new variable.
(max_aux, EXTRA_DIST): Ensure that we distribute all manpages.
Remove from CVS, since ./bootstrap generates them automatically.
* .cvsignore: Add INSTALL, Makefile.in, *.cache, *.lineno, *.log.
Remove more-specific entries. This catches files like configure.lineno.
* man/.cvsignore: Add Makefile.in.
* src/.cvsignore: Add Makefile.in.
Remove .version, dir.c, install, mvdir, stamp-v, vdir.c, version.c.
For .cvsignore file under the tests directory:
Add Makefile.in. Sort entries if necessary. Remove *.I, *.E,
*.X, *.O, *-tests, build-script, mk-script if they're never
created in this directory.
* build-aux/.cvsignore: New file.
* doc/.cvsignore: Add Makefile.in, coreutils.html, coreutils.pdf,
coreutils.ps, coreutils.tps. Remove coreutils.cm (dunno what it
is, but the makefile doesn't mention it). Remove coreutils.info
as it is subsumed by coreutils.info*.
* lib/.cvsignore: Add Makefile.in, getdate.tab.h.
Remove stat.c, sysexit.h.
* m4/.cvsignore: Remove Makefile, dev-ino.m4, glibc2.m4, intdiv0.m4,
inttypes-h.m4, inttypes-pri.m4, jm-glibc-io.m4, lcmessage.m4,
lock.m4, printf-posix.m4, same-inode.m4, size_max.m4,
uintmax_t.m4, ulonglong.m4, visibility.m4, xsize.m4. Many of
these are put in automatically by ../bootstrap, but that's a
bootstrap bug that I plan to fix shortly.
* po/.cvsignore: More ../bootstrap-related fixes, plus remove old
cruft. Add *.po, LINGUAS, Makevars. Remove *.cat, *.msg,
cat-id-dbl.c, messages.mo, stamp-cat-id.
