Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
All tests currently pass on NFS on Linux kernel 2.6.22 at least,
but some fail on 2.6.9, so we exclude those here.
* tests/init.cfg (is_local_dir_): A new function
returning if the specified directory is on a local file system.
(require_local_dir_): A new function to skip tests
if the current directory is not on a local file system.
* tests/cp/existing-perm-race: Skip if non local.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/du/basic: Use refactored function.
* tests/install/basic-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
* tests/du/slink: Likewise. Remove redundant test
for NFS file system.
* tests/misc/join: s/local/locale/.
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
* tests/install/install-C: Use 2755 (set-gid), not 1755 (sticky),
to test install -C with non-permission mode bits set. At least on
FreeBSD with a UFS file system, a non-root user may not set the
sticky bit on a non-directory.
* tests/test-lib.sh (skip_if_setgid_): New function.
* tests/setgid-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove setgid-check.
* tests/chmod/c-option: Use the new function rather than sourcing
the separate file.
* tests/cp/cp-parents: Likewise.
* tests/install/install-C: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* src/install.c (have_same_content): New function to compare files
content.
(extra_mode): New function checking for non-permission bits in mode.
(need_copy): New function to check if copy is necessary.
(main): Handle new option --compare (-C).
(copy_file): Skip file copying if not necessary.
(usage): Show new option --compare (-C) in --help.
* tests/install/install-C: Basic tests for install --compare (-C).
* tests/install/install-C-root: Tests requiring root privileges.
* tests/install/install-C-selinux: Tests requiring SELinux.
* tests/Makefile.am: Add new tests for install --compare (-C).
* doc/coreutils.texi: Document new install option --compare (-C).
* NEWS: Mention the change.
* tests/install/strip-program: Use $PREFERABLY_POSIX_SHELL,
not POSIX_SHELL. The latter may be empty, and would fail
on OpenBSD 3.9.
* tests/check.mk (TESTS_ENVIRONMENT): Propagate
PREFERABLY_POSIX_SHELL to tests.
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
...to specify the program used to strip binaries
* src/install.c (main): Handle new option --strip-program.
(strip): Use strip program from global variable strip_program.
(usage): Mention new option --strip-program in --help.
* tests/tests/strip-program: Test case for new option --strip-program.
* tests/Makefile.am: Add new test case to test set.
* doc/coreutils.texi: Mention new option --strip-program.
* NEWS: Mention the change.
* TODO: Remove completed task.
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable.
* tests/rm/empty-name: Likewise.
* tests/rm/unreadable: Reenable this test. Adjust for new rm.
* tests/mkdir/Makefile.am: Add writable-under-readonly.
* tests/mkdir/writable-under-readonly: Add some comments.
This test is always skipped, for now.
* tests/Makefile.am (ta): Hook up the new root-only script.
* tests/tail-2/infloop-1: Make this test pass.
* tests/tail-2/Makefile.am (TESTS): Add infloop-1.
* tests/tail-2/fflush: Remove unused file.
* tests/check.mk (vc_executable_is_in_TESTS): More portable.
* tests/check.mk (check): Depend on the above.
* build-aux/check.mk: Remove comment mentioning AUTHORS file.
I started with the patches from Red Hat.
The entries below tell how the code evolved.
* src/ls.c (print_long_format, print_file_name_and_frills): When
there is no security context (due to getfilecon/lgetfilecon failing
with e.g. ENOTSUP), print it as "?", not "".
* src/ls.c (print_file_name_and_frills): Make -Z work without -l.
(length_of_file_name_and_frills): Likewise.
* src/ls.c: Remove the --lcontext and --scontext options.
Change the way -Z, --context work so that it no longer implies -l.
Thus, -Z -l will work like -lcontext and -Z without -l will work
like --scontext.
Adjust tests to reflect new 'ls -l' syntax -- affects only
systems with SELinux when operating on a file with no ACL.
These tests assumed that everything before the first space on
each line is the 10-byte mode string. But there may also be a "+"
in the 11th column, just before the space. However, note that this
is not new. The same thing would have happened even without the
change below, when listing a file with an ACL.
* tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm:
* tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod:
* tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm:
Don't make compilation depend on USE_ACL. An SELinux security
context counts as an "alternate access control method", so ls
must output a "+" for each file with a security context.
* src/ls.c [struct fileinfo] (have_acl): Declare unconditionally.
(FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly.
(gobble_file): Record whether a file has a security context, and
update the condition used to determine whether to print the "+".
(gobble_file): Call getfilecon/lgetfilecon also when
format == long_format, so that we get the "+".
* src/ls.c (gobble_file): Add a comment explaining why (with a
security context option) ls doesn't exit nonzero due to e.g.,
getfilecon failing with errno == ENOTSUP.
* src/ls.c (gobble_file): Ignore failure of getfilecon if it's due
to ENOTSUP.
* src/ls.c (gobble_file): Factor out three small blocks using
getfilecon and lgetfilecon.
Don't ignore return value from getfilecon and lgetfilecon.
* src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C
ternary operator).
(print_scontext_format): Likewise.
(print_scontext): Declare to be "bool", not int. Adjust uses.
* src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX).
* tests/misc/chcon: New file.
* tests/misc/chcon-fail: New file.
* tests/Makefile.am (check-root): Run new, root-only misc/chcon test.
* tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail.
* tests/misc/Makefile.am (TESTS): Add selinux.
* tests/misc/selinux: New file.
* tests/help-version: Skip chcon.
inaccessible parent, make the parent inaccessible *after* making "."
unreadable. Otherwise, running "chmod a-r ." in an already-
inaccessible parent would fail on NFS with "Stale NFS file handle".
Reported by Bob Proulx.
* Transform all Makefile.am files so that when running "make check",
CU_TEST_NAME is set to the name of the test. This is so that when I
run valgrind-enabled (--log-file-qualifier=CU_TEST_NAME) "make check"
on the entire package it is more convenient to map a leak or error
found in a valgrind log file back to the offending test.
Use this command:
(echo tests/Makefile.am.in; find tests -name Makefile.am) \
|xargs perl -pi -e '/^(\s*)PATH=...VG_PATH_PREFIX/ and ' \
-e 'print $1,q|CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst |,"\\\n"'
[patch by Paul Eggert]
* tests/chmod/c-option: When double-quoting part of a word, prefer
to double-quote the whole word. This is a bit easier to read (at
least for me), and in some cases it avoids a shell bug with Tru64
4.0 sh reported by Nelson H. F. Beebe. For example, instead of
"$abs_srcdir"/../setgid-check we now write
"$abs_srcdir/../setgid-check".
* tests/cp/cp-parents: Likewise.
* tests/du/inaccessible-cwd: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/install/basic-1: Likewise.
* tests/install/trap: Likewise.
* tests/misc/close-stdout: Likewise.
* tests/mkdir/concurrent-1: Likewise.
* tests/mkdir/p-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/readlink/can-e: Likewise.
* tests/readlink/can-f: Likewise.
* tests/readlink/can-m: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/unread3: Likewise.
* tests/touch/no-create-missing: Likewise.
* lib/.cvsignore: Add uinttostr.c.
left-to-right in some cases.
* src/chmod.c (wd_errno): New var.
(chmod_file): New function, with most of the contents of the
old prcess_file function.
(process_files): Use it. This gives file names to fts one
at a time, so that they are processed left-to-right as POSIX
requires.
* src/chown-core.c (wd_errno, chown_files): Likewise.
(chown_file): New function.
* tests/install/basic-1: Redo test so as to not workaround
the chmod bug, thereby testing for it.
* bootstrap.conf (gnulib_modules): Add savewd.
* src/install.c: Include savewd.h.
(process_dir): New function.
(main, install_file_in_file_parents): Use it, along with the new
savewd module, to avoid some race conditions.
* src/mkdir.c: Include savewd.h.
(struct mkdir_options): New members make_ancestor_function, mode,
mode_bits.
(make_ancestor): Return 1 if the resulting directory is not readable.
(process_dir): New function.
(main): Use it, along with new savewd module, to avoid some
race conditions. Fill in new slots of struct mkdir_options, so
that callees get the values.
* tests/install/basic-1: Test for coreutils 5.97 bug that was
fixed in coreutils 6.0, and which should still be fixed with
this change.
* tests/mkdir/p-3: Likewise.
Remove from CVS, since ./bootstrap generates them automatically.
* .cvsignore: Add INSTALL, Makefile.in, *.cache, *.lineno, *.log.
Remove more-specific entries. This catches files like configure.lineno.
* man/.cvsignore: Add Makefile.in.
* src/.cvsignore: Add Makefile.in.
Remove .version, dir.c, install, mvdir, stamp-v, vdir.c, version.c.
For .cvsignore file under the tests directory:
Add Makefile.in. Sort entries if necessary. Remove *.I, *.E,
*.X, *.O, *-tests, build-script, mk-script if they're never
created in this directory.
* build-aux/.cvsignore: New file.
* doc/.cvsignore: Add Makefile.in, coreutils.html, coreutils.pdf,
coreutils.ps, coreutils.tps. Remove coreutils.cm (dunno what it
is, but the makefile doesn't mention it). Remove coreutils.info
as it is subsumed by coreutils.info*.
* lib/.cvsignore: Add Makefile.in, getdate.tab.h.
Remove stat.c, sysexit.h.
* m4/.cvsignore: Remove Makefile, dev-ino.m4, glibc2.m4, intdiv0.m4,
inttypes-h.m4, inttypes-pri.m4, jm-glibc-io.m4, lcmessage.m4,
lock.m4, printf-posix.m4, same-inode.m4, size_max.m4,
uintmax_t.m4, ulonglong.m4, visibility.m4, xsize.m4. Many of
these are put in automatically by ../bootstrap, but that's a
bootstrap bug that I plan to fix shortly.
* po/.cvsignore: More ../bootstrap-related fixes, plus remove old
cruft. Add *.po, LINGUAS, Makevars. Remove *.cat, *.msg,
cat-id-dbl.c, messages.mo, stamp-cat-id.
