Relax initial regexp to match more instances, but add a
filter to avoid some invalid conversions. Run this:
git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \
-e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \
-e ' s/\`([^'\''"]*?'\'')/'\''$1/g'
The last disjunct in the above (...) filter is to exempt
any line that contains this string: '\''
With quoting like that, converting a ` to ' is likely to cause trouble,
so we'll handle those manually. Here are three examples where
the exemption is required:
*': `link-to-dir/'\'': hard link not allowed for directory'*) ;;
printf 'creating file `%s'\''\n' $f
'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
Automatically adjust both the source (now in only one place)
and all tests that expect the resulting output via this:
git grep -l 'Try.*--help' src/system.h tests \
| xargs perl -pi -e 's/Try \\?`(\S+ --help)/Try '\''$1/'
* tests/misc/xstrtol: Use '...' to match new quoting in most places.
However, leave `9x' to match the sole comparison against output
from the quote function, which still uses `...'.
* tests/misc/sort-merge: Likewise, though here I had to leave
`...'-quoted output to match output from four tests.
* tests/pr/pr-tests: Convert a single `...' to '...'.
* gnulib: Update submodule to latest.
* tests/misc/timeout-parameters: Verify that the timer doesn't
fire immediately in the problematic range, and avoid overflow
checks in that case.
* man/timeout.x: Mention the possible bug.
Reported by Bruno Haible
* cfg.mk (sc_prohibit_short_facl_mode_spec): New rule.
* tests/cp/acl: Extend setfacl mode spec to have length 3.
* tests/ls/slink-acl: Likewise.
* tests/mv/acl: Likewise.
Report and analysis by Bruno Haible.
* src/split.c (lines_chunk_split): Fix logic bug that led to
unwarranted failure of "split -n l/2 /dev/zero" on NetBSD 5.1.
The same would happen when splitting a growing file, where
open/lseek-end gives one size, but by the time we read, there
is more data available.
(bytes_chunk_extract): Likewise.
* NEWS (Bug fixes): Mention this.
* tests/split/l-chunk: The latter case was not exercised.
Add code to do that.
Bug introduced with the chunk-selecting feature in v8.7-25-gbe10739.
Co-authored-by: Jim Meyering <meyering@redhat.com>
This program is compatible with other realpath(1)
implementations, and also incorporates relpath like support,
through the --relative options. The relpath support
was suggested by Peng Yu, who also provided an initial
implemenation of that functionality.
* AUTHORS: Add my name.
* NEWS: Mention the new command.
* README: Likewise.
* doc/coreutils.texi (realpath invocation): Add realpath info.
* man/Makefile.am (realpath.1): Add dependency.
* man/realpath.x: New template.
* man/.gitignore: Ignore generated man page.
* po/POTFILES.in: Add src/realpath.c.
* src/.gitignore: Exclude realpath.
* src/Makefile.am (EXTRA_PROGRAMS): Add realpath.
* src/realpath.c: New file.
* scripts/git-hooks/commit-msg: Add realpath to the list of prefixes.
* tests/Makefile.am (TESTS): Add misc/realpath.
* tests/misc/realpath: New file.
* tests/check.mk (.built-programs): Depend on src/Makefile.am,
so that when we add a program, this file is updated, and the new
program is tested via misc/help-version. Spotted by Pádraig Brady.
This fixes Bug#10293, which I guess was introduced in commit
95c948b06a dated 2003-10-02.
* NEWS: Document fix.
* src/du.c (process_file): Don't count files in different file
systems if -x is given.
* tests/du/one-file-system: Test for this bug.
* src/ls.c (decode_switches): Replace our use of XARGMATCH
with open-coded version so that we can give a better diagnostic.
* tests/ls/time-style-diag: New file.
* tests/Makefile.am (TESTS): Add it.
Reported by Dan Jacobson in http://bugs.gnu.org/10253
with suggestions from Eric Blake and Paul Eggert.
Commit 5eeaca94 added /sbin to the PATH for tests using mkfs. For other
tests, e.g. tests/cp-fiemap-perf using filefrag, we need /usr/sbin also.
Add both directories generally for the tests, "since many of us always
augment our PATH with all of the sbin paths all of the time anyway" (Bob
in http://lists.gnu.org/archive/html/coreutils/2011-11/msg00107.html).
The previous commit is hereby obsolete.
* tests/init.cfg (sanitize_path_): Add /sbin and /usr/sbin to PATH
unless already included. Needed for tests using admin tools like mkfs
and filefrag on systems where the user's environment does not have
these directories in the PATH.
* tests/init.cfg (require_mkfs_PATH_): Remove obsolete function.
* tests/cp/cp-a-selinux: Remove require_mkfs_PATH_ call.
* tests/cp/cp-mv-enotsup-xattr: Likewise.
* tests/cp/sparse-fiemap: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/rm/read-only: Likewise.
Commit 5b3e538 proved useful enough to migrate to gnulib after
enhancing it to be more generic, which in turn pointed out that
commit a2c811db missed an offender.
* gnulib: Update to latest.
* cfg.mk (sc_prohibit_reversed_compare_failure): Delete, now that
gnulib provides it.
* tests/ls/dangle: Fix last offender.
POSIX-conforming getuid, geteuid, etc. functions cannot fail,
but on GNU/Hurd systems and some others, they may.
* src/id.c (main) [__GNU__]: Detect and diagnose any such failure.
* tests/id/gnu-zero-uids: New file.
* tests/Makefile.am (TESTS): Add it to the list.
* tests/init.cfg (require_gnu_): New function.
Redirect with the shell command, not in a separate 'exec'.
Without this patch, Fedora 15 x86-64 /bin/sh (i.e., Bash 4.2.10)
complained about running out of file descriptors in the shell.
This fixes an incompatibility with POSIX 2008 and with BSD.
Problem reported by Abdallah Clark (Bug#9939)
via Alan Curry (Bug#10016).
* NEWS: Document this.
* doc/coreutils.texi (General output formatting): Document the
new -k behavior, and --kibibytes.
* src/ls.c (file_human_output_opts): New static var.
(long_options, usage): Add --kibibytes.
(decode_switches, gobble_file, print_long_format):
Implement the new -k behavior.
* tests/ls/block-size: New file.
* tests/Makefile.am (TESTS): Add it.
These issues were seen on an OpenSuse 10.3 system
(kernel 2.6.22.5 x86_64, glibc 2.6.1-18, bash updated to 4.2),
and also on a 64 bit SLES system with a 2.6.16 kernel.
Both systems had 2 CPUs.
There were two issues seen. 1. Occasionally the
timeout.cmd shell script would block SIGINT until
the sleep command exited. 2. Much less frequently the
signal handler in the timeout command itself was ignored,
causing SIGALRM to kill the process.
* tests/misc/timeout-group: Detect the above two cases,
and skip rather than fail. Note only issue 2. causes
a failure unless skipped, but we skip for case 1. also,
for diagnostic purposes.
This could cause a false failure, or even
an infinite loop in rare circumstances.
* tests/misc/timeout-group: Increase the timeouts
passed to the timeout command, so that they're
effectively not used. Instead the command termination
is triggered by the kill commands when everything
is in the correct state.
Reported by Bernhard Voelker.
* tests/tail-2/pipe-f2: Don't always wait 10 seconds.
Before, this test would always wait 10 seconds.
Now, it stops early when it detects that tail -f has written output.
BTW, the race condition that prompted changing the timeout from 1 second
to 10 was that tail -f could be killed by the timeout before producing
any output.
* src/tac.c (copy_to_temp): Do not reuse the template buffer.
Instead, scribble only on a freshly-xstrdup'd copy each time.
Free that buffer both here, upon failure, and ...
(tac_nonseekable): ...free the buffer in caller, upon success.
* tests/misc/tac-2-nonseekable: New file.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
Reported by Ambrose Feinstein in http://debbugs.gnu.org/9762.
* tests/check.mk (vc_exe_in_TESTS): The main change is to
not start a sed process for each file under tests/,
which was taking around 2.5s on a 2.1GHz i3-2310M.
Also adjust the rule to no longer use temporary files.
* tests/df/total-verify: Use require_perl_, so that this test is
skipped when perl is not available.
* tests/rm/deep-2: Likewise, and fix wording in a comment.
Reported by Bruno Haible.
* tests/ls/slink-acl: New file.
* tests/Makefile.am (TESTS): Add it.
* tests/init.cfg (require_setfacl_): New function.
* gnulib: Update to latest, for file-has-acl changes.
* NEWS (Bug fixes): Mention it.
See http://thread.gmane.org/gmane.comp.lib.gnulib.bugs/28538. This
":>k; setfacl -m m::r k; ln -s k s; ls -Log s" should print e.g.,
-rw-r-----+ 1 0 Oct 5 19:22 s
With the ls from coreutils-8.13, it would print this (with "." or
nothing in place of the "+"):
-rw-r-----. 1 0 Oct 5 19:22 s
This is related to commit b7f2b51c, 2010-01-01,
"ls: fix color of broken symlinks colored as target"
which didn't handle the --dereference case.
The simplest way to reproduce the resultant
erroneous "argetm" is as follows:
$ ln -s /no-such dangle
$ env LS_COLORS=ln=target ls --dereference --color
ls: cannot access dangle: No such file or directory
argetmdangle
This is also an issue with the `tree` utility,
reported here: http://bugs.debian.org/586765
* src/ls.c (print_color_indicator): Move the handling
of 'ln=target' in $LS_COLORS (color_symlink_as_referent == true)
to a higher scope, to handle all cases where type == C_LINK.
* tests/misc/ls-misc: Add a test case for the specific issue,
and 2 further test cases to verify other code paths in this area.
Reported by Jason Glassey.
These commands would fail to terminate:
yes -- -nan | head -156903 | sort -g > /dev/null
echo nan > F; sort -m -g F F
That can happen with any strtold implementation that includes
uninitialized data in its return value. The problem arises in the
mergefps function when bubble-sorting the two or more lines, each
from one of the input streams being merged: compare(a,b) returns 64,
yet compare(b,a) also returns a positive value. With a broken
comparison function like that, the bubble sort never terminates.
Why do the long-double bit strings corresponding to two identical
"nan" strings not compare equal? Because some parts of the result
are uninitialized and thus depend on the state of the stack.
For more details, see http://bugs.gnu.org/9612.
* src/sort.c (nan_compare): New function.
(general_numcompare): Use it rather than bare memcmp.
Reported by Aaron Denney in http://bugs.debian.org/642557.
* NEWS (Bug fixes): Mention it.
* tests/misc/sort-NaN-infloop: New file.
* tests/Makefile.am (TESTS): Add it.
* src/md5sum.c (split_3): Detect and handle BSD reversed
format checksums.
* tests/misc/md5sum-bsd: Add a new test.
* tests/Makefile.am: Reference new test.
* NEWS: Mention the improvement
Suggested by Rimas Kudelis.
