Avoid the following error with -mno-ssse3:
inlining failed in call to 'always_inline' '_mm_shuffle_epi8':
target specific option mismatch
* configure.ac: Ensure we use ssse3 specific code when
checking whether to enable the pclmul cksum implementation.
* src/pr.c (init_parameters): Ensure we avoid a 0 lines_per_body
which was possible when adjusting for double spacing.
That caused print_page() to always return true,
causing an infinite loop.
* tests/pr/pr-tests.pl: Add a test case.
* NEWS: Mention the fix.
Fixes https://bugs.debian.org/1034808
Since skipping of files is central to the operation of -i and -u,
and with -u one may be updating few files out of many,
reinstate the verbosity of this functionality as it was before 9.3.
* src/copy.c (copy_internal): Only output "skipped" message
with --debug. Also adjust so message never changes with --debug.
* tests/cp/cp-i.sh: Adjust accordingly.
* tests/mv/mv-n.sh: Likewise.
* tests/cp/debug.sh: Add explicit test case for message.
* NEWS: Mention the change in behavior.
When run under QEmu emulation emulated /proc files have
unstable inode numbers.
* tests/cp/proc-short-read.sh: Skip if unstable inode numbers detected.
* src/install.c (strip): Prepend "./" to file names with a leading "-".
* tests/install/strip-program.sh: Add a test case.
* NEWS: Mention the bug fix.
Reported in https://bugs.debian.org/1034429
* tests/misc/tty-eof.pl: Ensure we don't erroneously
skip commands with parameters.
Comment as to why cut(1) is treated differently.
Adjust expect calls to not wait needlessly for cut output.
* tests/cp/sparse-2.sh: Don't depend on the copy taking
<= allocation of the source. Instead leverage --debug
to check that zero detection is being enabled.
Fix a build failure seen on gcc 3.4 on Solaris 10 at least.
* src/crctab.c: Ensure we include config.h for all compilation units.
This is now required for new _Noreturn usage in gnulib for stdint.h.
* src/cksum.c: Update generation code to ensure config.h included.
* cfg.mk: Remove crctab.c exclusion from the config.h check.
* src/wc.c (wc): Update the offset when not reading,
and do read if we can't update the offset.
* tests/misc/wc-proc.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/61300
* NEWS: Mention the change in behavior to issue a "not replaced"
error diagnostic with -n, and the "skipped" message with -v.
* src/copy.c (copy_internal): Adjust to output the "skipped" messages
depending on -i, -n, -u.
* tests/cp/cp-i.sh: Adjust accordingly.
* tests/mv/mv-n.sh: Likewise.
Add --update=none which is equivalent to the --no-clobber behavior
from before coreutils 9.2. I.e. existing files are unconditionally
skipped, and them not being replaced does not affect the exit status.
* src/copy.h [enum Update_type]: A new type to support parameters
to the --update command line option.
[enum Interactive]: Add I_ALWAYS_SKIP.
* src/copy.c: Treat I_ALWAYS_SKIP like I_ALWAYS_NO (-n),
except that we don't fail when skipping.
* src/system.h (emit_update_parameters_note): A new function
to output the description of the new --update parameters.
* src/cp.c (main): Parse --update arguments, ensuring that
-n takes precedence if specified.
(usage): Describe the new option. Also allude that
-u is related in the -n description.
* src/mv.c: Accept the new --update parameters and
update usage() accordingly.
* doc/coreutils.texi (cp invocation): Describe the new --update
parameters. Also reference --update from the --no-clobber description.
(mv invocation): Likewise.
* tests/mv/update.sh: Test the new parameters.
* NEWS: Mention the new feature.
Addresses https://bugs.gnu.org/62572
* gnulib: Reference the latest gnulib including the
fix to the backupfile module in commit 94496522.
* tests/cp/backup-dir.sh: Add a test to ensure
we rename appropriately when backing up through subdirs.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/62607
* tests/misc/tee.sh: Call cleanup_ in all cases to ensure
there are no overlapping interactions on the fifo that
might impact later parts of the test. This was seen to
cause issue with dash on musl libc.
Addresses https://bugs.gnu.org/62542
* tests/misc/csplit-heap.sh: More memory is required to avoid
a false failure on some systems. Noticed with musl libc
with bash as the shell. This is confirmed to still easily
trigger with the original memory leak being tested.
Addresses https://bugs.gnu.org/62542
* src/wc.c (wc): Use INT_ADD_WRAPV() to detect overflow.
(main): Upon overflow, saturate the total, print a diagnostic,
and set exit status.
* tests/misc/wc-total.sh: Add a test case, which operates
on BTRFS and 64 bit systems at least.
Reported at https://bugs.debian.org/1027100
* NEWS: Mention the fix.
* src/dircolors.c: Fail upon read error from getline().
* tests/misc/dircolors.sh: Add a new test.
* tests/local.mk: Reference the new test.
On restricted systems like android or some containers,
FICLONE could return EPERM, EACCES, or ENOTTY,
which would have induced the command to fail to copy
rather than falling back to a more standard copy.
* src/copy.c (is_terminal_failure): A new function refactored
from handle_clone_fail().
(is_CLONENOTSUP): Merge in the handling of EACCES, ENOTTY, EPERM
as they also pertain to determination of whether cloning is supported
if we ever use this function in that context.
(handle_clone_fail): Use is_terminal_failure() in all cases,
so that we assume a terminal failure in less errno cases.
* NEWS: Mention the bug fix.
Addresses https://bugs.gnu.org/62404
This applies to all checksumming utilities,
where we incorrectly report all subsequent files as checking 'OK'
once any file has passed a digest check.
The exit status was not impacted, only the printed status.
* src/digest.c (digest_check): Use the correct state variable
to determine if the _current_ file has passed or not.
* tests/misc/md5sum.pl: Add a test case.
Fixes https://bugs.gnu.org/62403
Similarly to the fix to tests/rmdir/ignore.sh in c0e5f8c59,
tee should not be expected to fail when run with read-only outputs
when run as root.
* tests/misc/tee.sh: Add uid_is_privileged_ guard around test for
read-only outputs.
* tests/ls/stat-free-symlinks.sh: Filter out syscalls that
return ENOSYS, as that was seen with statx() on Debian 10.13
on mips64, and resulted in overcounting of stat calls.
* src/stty.c (main): Use static structures to ensure
they're initialized (to zero), so that random data is
not displayed, or compared resulting in a inaccurate
failure reported to users. This was seen on musl libc
where some parts of the termios c_cc array were
not initialized by tcgetattr().
Reported by Bruno Haible.
* tests/misc/tee.sh: AIX doesn't support detecting
closed outputs either with poll() or select() so avoid
testing that functionality.
* tests/tail-2/pipe-f.sh: Likewise.
Since SELinux version 3.5, the return value of context_str(3) is
declared as const; see:
https://github.com/SELinuxProject/selinux/commit/dd98fa322766
Therefore, GCC complains (here with -Werror):
src/selinux.c: In function 'defaultcon':
src/selinux.c:152:16: error: assignment discards 'const' qualifier \
from pointer target type [-Werror=discarded-qualifiers]
152 | if (!(constr = context_str (tcontext)))
| ^
src/selinux.c: In function 'restorecon_private':
src/selinux.c:252:16: error: assignment discards 'const' qualifier \
from pointer target type [-Werror=discarded-qualifiers]
252 | if (!(constr = context_str (tcontext)))
| ^
* src/selinux.c (defaultcon): Define CONSTR as const.
(restorecon_private): Likewise.
* src/sum.c (output_bsd): On sparc64 for example,
a crc of 0 was output due to casting an int variable
to uint16_t and thus operating on the wrong end of the variable.
Instead use explicit assignment to the narrower type
to ensure we get the appropriate data.
(output_sysv): Likewise.
Reported by Bruno Haible.
