* tests/filefrag-extent-compare: Don't check the length of the
last extent, as this was seen to vary on XFS, where it leaves
trailing blocks allocated for performance reasons.
* tests/cp/fiemap-empty: Though not seen as an issue in practise,
try to avoid possible issues with the allocator in file systems,
by requesting to allocate a power of 2.
* NEWS: Slightly obfuscate a line to avoid a false-positive
doubled-word ("is-is") match.
Fix a grammar error in news for 8.2.
* cfg.mk (old_NEWS_hash): Resync.
and to avoid a false-positive "TO to" in new doubled word check.
* src/install.c (change_timestamps): Rename parameters for
readability. Make the comment match the code.
* extent-scan.h (extent_scan_free): Init the pointer to NULL,
and reset the count to 0, so that we can realloc the buffer.
* src/extent-scan.c (extent_scan_init): Likewise.
(extent_scan_read): Loop over multiple fiemap scans, so we handle
mergeable extents that span across fiemap scan boundaries. Once
we have enough unique extents, return so as to minimize memory use.
Running the new fiemap-empty test uses 600MB of disk space via
fallocate, and in so doing caused failure in unrelated tests that
were running in parallel on a small file system. Rather than
simply running fallocate (which allocates the space, inducing
disk full when it fails), skip the test if there is less than
800MB of free space, as computed via stat and awk.
* tests/init.cfg (require_file_system_bytes_free_): New function.
* tests/cp/fiemap-empty: Use it.
* tests/misc/help-version: Sleep only ~30s, not 10m.
The latter was a problem when somehow that sleep process would
hang around and thereby prevent (for up to 10m) a normal unmount
of the temporary partition in which I'd run the tests.
* tests/cp/preserve-gid: Simply chmod a+rx instead.
That is safer, in case the nameless UID actually has an account,
and might take advantage of root running a program in a directory
under its control
* src/Makefile.am (sc_tight_scope): Adjust rule to use an eval-based
trap-setting for-loop rather than 4x hard-coded 128+N constants.
Also catch SIGQUIT (3). Tweak comments.
* src/extent-scan.c (extent_need_sync): Require sync also for 2.6.38.
Without this, part of the cp/fiemap-empty test would fail both on
F15-to-be (2.6.38.1-6.fc15.x86_64) and rawhide. For details, see
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/22190
When running the erroneous command, cp -rl A D D, and depending on the
structure of directories A and D and the file system type (because that
changes order of dir. entry traversal), cp would sometimes fail to
detect that D was being copied into D, and would create D/D/D/D/D/...
until it hit PATH_MAX or exhausted some resource.
I noticed this via the occasional failure of the cp/into-self test
when run using a ZFS file system. It is occasional because the bug
is dependent on the order in which directory entries are traversed,
and that is apparently indeterminate with ZFS.
Technically, with the current recursive implementation, there is no
risk of an infinite loop, due to stack limitations, but with an
eventual fts-based implementation, it might have iterated until
disk space or inodes are exhausted.
* src/copy.c (copy_dir): Avoid copy-into-self interminable loop on
systems with large PATH_MAX. On other systems, diagnose the copy-into-
self error consistently. Handle the parameter,
first_dir_created_per_command_line_arg, correctly when there are two
or more sub-directories.
* src/copy.c (extent_copy): Treat an allocated but empty extent
much like a hole. I.E. don't read data we know is going to be NUL.
Also we convert the empty extent to a hole only when SPARSE_ALWAYS
so that the source and dest have the same allocation. This will
be improved soon, when we use fallocate() to do the allocation.
* tests/cp/fiemap-empty: A new test for efficiency and correctness
of copying empty extents.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the change in behavior.
* src/extent-scan.c (extent_scan_read): Add a more stringent check
for OFF_T overflow, to ensure subsequent code is immune.
Detect overlapping extents and adjust, so as files always copied.
Detection using a single scan with fallback to a standard copy
was thought too expensive in memory or time.
* NEWS: Mention the fix
This bug was introduced in commit ca9e212c, 2009-09-24,
"cp, mv: use linkat to guarantee semantics", which
inadvertently disabled the creation of hardlinks to symlinks.
However rather than implementing the intention of that commit
and relying on gnulib linkat emulation, we'll revert to the
previous emulation as that maintains ownership and timestamps.
* src/copy.c (copy_internal): Use our existing hardlink to
symlink emulation when link() might dereference the symlink.
Also ensure that we copy the timestamps of the original symlink
when we use the emulation.
* tests/cp/link-symlink: Add a test to ensure timestamps copied.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
Reported by Ruediger Meier
* tests/tail-2/inotify-rotate: Wait 50% longer for grep to succeed.
Without this change, this test would fail consistently when using
"make -j25 check" with F15 in a virtio- and spinning-rust-backed
virtual machine.
* src/extent-scan.h (struct extent_scan): Add the fm_flags member to
pass to the fiemap scan.
* src/extent-scan.c (extent_need_sync): A new function used to
detect Linux kernels before 2.6.38.
(extent_scan_init): Add FIEMAP_FLAG_SYNC when needed.
* tests/cp/sparse-fiemap: Adjust comment.
* NEWS: Mention the change in behavior.
Indirectly suggested by Mike Frysinger
* tests/init.cfg (require_selinux_): Skip the test also when
/proc/filesystems does not list selinuxfs.
Add comments.
* cfg.mk (exclude_file_name_regexp--sc_file_system): Exempt
tests/init.cfg, with its use of /proc/filesystems.
Based on the patch by Mathieu Bridon in http://debbugs.gnu.org/8359.
More discussion in http://bugzilla.redhat.com/573111
* src/find-mount-point.h: Move "*" to where it belongs.
Move "const", too.
* src/find-mount-point.c: Move "const" to conform.
* src/Makefile.am (sc_tight_scope): Allow `*'s before the function name.
Use perl's -l option and drop the \n after (and quotes around) $1.
* src/df.c (alloc_table_row): A new function to allocate storage
for a row of strings.
(print_table): A new function to interate over all stored strings in
the table, and apply alignment honoring the max width of each column.
(get_header): Renamed from print_header, and adjusted accordingly.
(get_dev): Renamed from show_dev. Also we no longer wrap longer
device names over two lines, which can be an unexpected issue for
scripts parsing the output from df.
(get_disk): s/show_/get_/
(get_point): Likewise.
(get_entry): Likewise.
(get_all_entries): Likewise.
* NEWS: Mention the change.
Make GNU coreutils' test recognize "==" as a synonym for "=".
This is already the case in GNU coreutils' expr, bash, ksh,
busybox ash, FreeBSD-current /bin/sh and /bin/test, and
OpenBSD's /bin/sh.
Before, env test a '==' a would fail with this diagnostic:
"test: ==: binary operator expected". Now, it succeeds.
* src/test.c: Accept "==" as a synonym for "=".
* doc/coreutils.texi (String tests): Document it.
Reported as http://debbugs.gnu.org/8263
Also see http://austingroupbugs.net/view.php?id=375
* tests/cp/preserve-gid: Ensure that every process under test uses
the cp binary we've just built. Before this fix, with a restrictive
umask or build-dir permissions, the UID-changing tests would end up
using whatever cp happened to be available through $PATH
Analysis by arbogast.cedric@gmail.com in http://debbugs.gnu.org/8292.
The names in THANKS are generated from two sources: the hard-coded
list, THANKS.in, and the names of committers from the git log.
When a contributor on the hard-coded list commits a change,
we remove their now-redundant name from THANKS.in.
* THANKS.in: Remove a now-duplicate name.
* tests/filefrag-extent-compare: Merge adjacent extents in
each list before processing, so we correctly account for
split extents in either list.
* tests/cp/sparse-fiemap: Remove the explicit syncing,
which was only changing the way extents were arranged,
and thus working around the extent comparison issue
that was seen on ext4 loop back.
* gl/lib/mbsalign.c (rpl_wcswidth): Remove this in favor
of the equivalent wcswidth replacement in gnulib.
* bootstrap.conf: Depend on the wcswidth module.
Suggested by Bruno Haible.
* gnulib: Update to latest, to address http://debbugs.gnu.org/8230.
When built on Solaris 9 and run on Solaris 10, touch would segfault.
Reported by Ben Walton.
* bootstrap: Update from gnulib.
* tests/init.sh: Likewise.
* NEWS (Bug fixes): Mention this.
* src/sort.c (SUBTHREAD_LINES_HEURISTIC): Do not spawn a new thread
for every 4 lines. Increase this from 4 to 128K. 128K lines seems
appropriate for a 5-year-old dual-core laptop, but it is too low for
some common combinations of short lines and/or newer systems.
* NEWS (Bug fixes): Mention it.
* src/extent-scan.c (extent_scan_read): Merge adjacent extents
that vary only in size, so that we may process them more efficiently.
This will be especially useful when we introduce fallocate()
so that we don't reproduce fragmentation in the destination.
* src/dd.c (warn_partial_read): New static var.
(iread): Diagnose partial reads if needed.
(iwrite): Don't diagnose them here; not needed any more.
(scanargs): Determine whether partial reads should be diagnosted.
