This relies on development Automake to provide multi-file
installation, and avoids relying on undocumented Automake
interfaces. It also removes special-casing for `['.
* configure.ac (AM_INIT_AUTOMAKE): Depend on 1.10a.
(CROSS_COMPILING): New Automake conditional.
* src/Makefile.am (install-exec-am, filtered_PROGS)
(d_bindir, cu-install-binPROGRAMS): Remove.
(INSTALL_PROGRAM) [!CROSS_COMPILING]: Set to `./ginstall'.
* m4/gmp.m4: New file; adds cu_GMP, which detects GNU MP.
* configure.ac: Use cu_GMP.
* src/Makefile.am: Link factor against libgmp if available.
* src/factor.c: Use GNU MP if it is available.
(emit_factor, emit_ul_factor, factor_using_division,
factor_using_pollard_rho, extract_factors_multi,
sort_and_print_factors, free_factors): new functions
for the arbitrary-precision implementation, taken from an example
in GNU MP.
(factor_wheel): Renamed; was called factor.
(print_factors_single): Renamed; was called print_factors.
(print_factors): New function, chooses between the single- and
arbitrary-precision algorithms according to availability of GNU MP
and the length of the number to be factored.
(usage, main): New options --bignum and --no-bignum.
* coreutils.texi (factor invocation): Document new command-line
options for the MP implementation and update the performance
numbers to take into account the asymptotically faster algorithm.
* TODO: Remove item about factoring large primes (it's done).
* m4/gmp.m4: Add support for --without-gmp.
* NEWS: Mention the new feature.
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add timeout command to list.
* src/timeout.c: New file.
* src/kill.c (operand2sig): Move function to its own file,
now that timeout.c will also use it.
* src/operand2sig.c (operand2sig): New file, extracted from kill.c.
* src/operand2sig.h (operand2sig): Declare.
* src/Makefile.am (EXTRA_PROGRAMS): Add timeout.
* src/.gitignore: Add timeout binary to list to ignore.
* doc/coreutils.texi (timeout invocation): Add timeout info.
(Signal specifications): New section, also referenced by kill.
* man/Makefile.am (timeout.1): Add dependency.
* man/timeout.x: New file.
* po/POTFILES.in: Add timeout.c and operand2sig.c to list to translate.
* tests/Makefile.am (TESTS): Add the two new tests.
* tests/misc/help-version: Add support for new timeout command.
* tests/misc/invalid-opt: Add support for new timeout command.
* tests/misc/timeout: New file: check basic timeout operation.
* tests/misc/timeout-parameters: New file: check invalid parameter
combinations.
* configure.ac (AC_CONFIG_FILES): Remove tests/pr/Makefile.
* tests/Makefile.am (SUBDIRS): Remove pr.
* tests/pr/pr-tests: New file, with tests from...
* tests/pr/Test.pm: ...here. Remove file.
* tests/Makefile.am (EXTRA_DIST): Add $(pr_data).
(pr_data): List all of the pr's test-related data files.
* src/cut.c (set_fields): Apply to_uchar to isblank operands.
* src/uniq.c (find_field): Likewise.
* src/seq.c (scan_arg): Likewise, for isspace.
* tests/misc/uniq: New file. Test for the above, but only
when isspace(0240).
* tests/Makefile.am (TESTS): Add misc/uniq.
* configure.ac: Use gt_LOCALE_FR.
* tests/check.mk (TESTS_ENVIRONMENT): Propagate LOCALE_FR to scripts.
* NEWS: Mention the bug fixes.
Before this patch, on FreeBSD 6:
$ printf 'x y z\nx \xa0 y z\n' > in
$ LC_ALL=fr_FR.UTF-8 uniq -f2 in|tr ' ' .
x.y.z
x. .y.z
With the patch:
$ LC_ALL=fr_FR.UTF-8 uniq -f2 in|tr ' ' .
x.y.z
This also affected many other locales:
for i in $(locale -a); do test $(LC_ALL=$i ./uniq -f1 in|wc -l)
= $(LC_ALL=$i uniq -f1 in|wc -l) || echo $i ; done
...
en_GB.ISO8859-1
en_GB.ISO8859-15
en_GB.UTF-8
en_IE.UTF-8
en_NZ.ISO8859-1
en_NZ.ISO8859-15
en_NZ.UTF-8
en_US.ISO8859-1
en_US.ISO8859-15
en_US.UTF-8
...
* configure.ac (AC_CONFIG_FILES): Remove wc/Makefile from the list.
* tests/Makefile.am (SUBDIRS): Remove wc from the list.
(TESTS): Add misc/wc.
* tests/misc/wc: New file, derived from tests/wc/Tests.pm.
* tests/wc/Test.pm: Remove file.
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
* bootstrap.conf (gnulib_modules): Pull in new module.
* GNUmakefile: Remove from version control.
* .gitignore: Update.
* configure.ac (AC_CONFIG_LINKS): Delete; rely on gnulib to do
this now.
* Makefile.am (EXTRA_DIST, distclean-local): Likewise.
Signed-off-by: Eric Blake <ebb9@byu.net>
* configure.ac: While every other sed tested supports usage like
'/\(re\)/{s//\1/;...<NEWLINE>}', and POSIX appears to requires this,
busybox's sed does not support it. So duplicate the regexp:
'/\(re\)/{s/\(re\)/\1/;...<NEWLINE>}'. Reported by Vincent Lefevre:
<http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/13013>.
* configure.ac (AC_CONFIG_LINKS): Use shell variable to bypass
automake distclean rules.
* Makefile.am (distclean-local): Clean GNUmakefile in VPATH builds,
since we are bypassing automake.
* GNUmakefile (_is-dist-target): 'distclean' is not a dist target.
* GNUmakefile: When Makefile is not present, make common targets depend
on "all" in order to trigger nicer error message.
* configure.ac: If autoconf is new enough, link GNUmakefile into VPATH
builds.
For more details, see
<http://article.gmane.org/gmane.comp.gnu.core-utils.bugs/12853>.
Signed-off-by: Eric Blake <ebb9@byu.net>
* configure.ac: Map commas to spaces in excluded-program list.
Use a comma-separated list, not a space-separated one.
* m4/include-exclude-prog.m4 (gl_INCLUDE_EXCLUDE_PROG):
Expect list of program names to be comma-separated.
Reported by Jan Bauke Douma.
* bootstrap: After all is done, transform the generated gnulib-tests/gnulib.mk.
* bootstrap.conf (gnulib_tool_option_extras): Set it here.
* gnulib-tests/Makefile.am: New file.
* Makefile.am (SUBDIRS): Add gnulib-tests.
* configure.ac (AC_CONFIG_FILES): Add gnulib-tests/Makefile.
* m4/jm-macros.m4 (coreutils_MACROS) [ARGMATCH_DIE_DECL]: Omit the
"extern " prefix to "void usage ()", so that the macro string value can
be used to construct a function definition in gnulib's test-argmatch.c.
* configure.ac (MAN): Transform ginstall.1 to install.1 using
a loop, rather than sed with \<...\>.
Problem reported by Bruno Haible.
Andreas Schwab reminded me that \< and \> are not portable.
* NEWS: Mention this.
* README: Add mktemp to the list.
* AUTHORS: Add this: mktemp: Jim Meyering
* src/mktemp.c: New file.
* src/Makefile.am (bin_PROGRAMS): Add mktemp.
(mktemp_LDADD): Add $(LIB_GETHRXTIME).
* man/mktemp.x: New file.
* man/Makefile.am (dist_man_MANS): Add mktemp.1.
(mktemp.1): New dependency.
* man/.cvsignore: Add mktemp.1.
* man/.gitignore: New file.
* src/.cvsignore, src/.gitignore: Add mktemp.
* tests/misc/mktemp: New file.
* tests/misc/Makefile.am (TESTS): Add mktemp.
* tests/Coreutils.pm (run_tests): Give the POST-test function
access to stdout and stderr contents, so it can verify that
the named-on-stdout file/dir does indeed exist and has proper
permissions, etc.
[po/ChangeLog]
* POTFILES.in: Add src/mktemp.c.
* tests/tee/basic: Move this file to ...
* tests/misc/tee: ...here. Don't rely on $PROG in env.
* tests/tee/dash: Move this file to ...
* tests/misc/tee-dash: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add tee.
* tests/Makefile.am (SUBDIRS): Remove tee.
* tests/tee: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/tee/Makefile
* tests/sum/basic-1: Move this file to ...
* tests/misc/sum: ...here. Don't rely on $PROG in env.
* tests/sum/sysv: Move this file to ...
* tests/misc/sum-sysv: ...here. Adapt it to use test-lib.sh.
* tests/misc/Makefile.am (TESTS): Add sum and sum-sysv.
* tests/Makefile.am (SUBDIRS): Remove sum.
* tests/sum: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/sum/Makefile.
